About this item
The Yamaha TF-Rack is a rack-mountable digital audio mixing console that features a touchscreen display, and is expandable up to 40 input channels by adding the optional Tio1608-D I/O rack. Ideal for a multitude of live sound reinforcement scenarios, the TF-Rack can also be used for live recording, offering 34x34 channel digital recording and playback via USB 2.0 using a computer and your preferred DAW software, and 2x2 channel recording and playback using any USB storage device.
- Features
- 16 Analog XLR/TRS Combo Mic/Line Inputs
- 16 Analog Outputs (8-XLR and 8-TRS)
- Per-Channel EQ / Comp & 8 FX Processors
- Recallable D-PRE Microphone Preamps
Specifications
- Mixer
Input Channels: 40 (32 mono + 2 stereo + 2 return) Aux Buses: 20 (8 mono + 6 stereo) Stereo Buses: 1 Sub Buses: 1 Input Channel Functions: 8 DCA Groups
- I/O
Inputs: 16 mic/line (XLR/TRS combo) + 1 stereo line (RCA pin) Outputs: 16 (XLR) Expansion Slots: 1
- DSP
8 effects + 10 GEQ
- USB
34 x 34 USB audio interface, 2-track recording via USB storage device
- Sampling Frequency
48 kHz, internal
- Signal Delay
Less than 2.6 ms, Input to Omni Out, Fs=48 kHz
- Total Harmonic Distortion
Less than 0.05% 20 Hz - 20 kHz @ +4 dBu into 600 Ohms, Input to Omni Out, input gain = min. (measured with a -18 dB/octave filter @ 80 kHz)
- Frequency Response
+0.5, -1.5 dB 20 Hz - 20 kHz, refer to +4 dBu output @ 1 kHz, Input to Omni Out
- Dynamic Range
110 dB typ., DA converter, 108 dB typ., Input to Omni Out, input gain = min
- Noise
Equivalent Input Noise: -128 dBu typ., input gain = max. (measured with an A-weight filter) Residual Output Noise: -85 dBu, ST master off (measured with an A-weight filter)
- Crosstalk
-100 dB (measured with a -30 dB/octave filter @ 22 kHz), adjacent Input/Omni Out channels, input gain = min
- Power Requirements
100 - 240 VAC 50/60 Hz
- Power Consumption
85 W
- Analog Inputs
Input Terminals: Input 1-16, ST In 1,2 Gain: -6 dB / +66 dB (Input 1-16) Load Impedance: 7.5 kOhms (Input 1-16); 10 kOhms (ST In 1,2) For Use with Nominal: 50 - 600-Ohm mics or 600-Ohm lines (Input 1-16); 600-Ohm lines (ST In 1,2) Sensitivity: -82 dBu (61.6 μV), -10 dBu (245 mV) (Input 1-16); -30 dBV (31.6 μV) (ST In 1,2) Nominal: -62 dBu (0.616 mV), +10 dBu (2.45 V) (Input 1-16); -10 dBV (316 mV) (ST In 1,2) Max. Before Clip: -42 dBu (6.16 mV), +30 dBu (24.5 V) (Input 1-16); +10 dBV (3.16 V) (ST In 1,2) Connector: Combo Jack (XLR-3-31 type or TRS phone) balanced (Input 1-16); RCA pin jack unbalanced (ST In 1,2)
- Analog Outputs
Output Terminals: Omni Out 1-16, Phones Source Impedance: 75 Ohms (Omni Out 1-16); 100 Ohms (Phones) For Use with Nominal: 600-Ohm lines (Omni Out 1-16); 40 Ohms (Phones) GAIN SW: +24 dBu position (default) (Omni Out 1-16) Nominal Output Level: +4 dBu (1.23 V) (Omni Out 1-16); 3 mW (Phones) Max. Output Level Before Clip: +24 dBu (12.3 V) (Omni Out 1-16); 75 mW (Phones) Connector: XLR-3-32 type balanced (Omni Out 1-16); stereo phone jack (TRS) unbalanced (Phones)
- Digital Input/Output
Terminals: USB (to Host), iPad Format: USB Data length 24-bit (USB to Host) Audio: 34-ch input / 34-ch output, PCM (USB to Host); Playback: MP3 or WAV file data / Record: WAV file data (iPad) Connector: USB (B-type) (USB to Host); USB (A-type) (iPad)
- Control I/O
Terminals: Network, Foot SW Format: IEEE802.3 (Network) Level: 10Base-T/100Base-TX (Network) Connector: RJ-45 (Network); TS Phone (Foot SW)
- Dimensions
18.9 x 5.2 x 16.1" / 48.0 x 13.2 x 40.9 cm
- Net Weight
20.3 lb / 9.2 kg
- Package Weight
27 lb
- Box Dimensions (LxWxH)
22.4 x 20.5 x 8.9"