About this item
- Features
- Compact third-generation access reader with Apple Touch Pass support.
- NFC Card & Keyfob Access
- Touch Pass
- Mobile Unlock
- Handwave Request to Exit
- Weatherproofing: IP55
Specifications
- Brand
Ubiquiti
- Model
G3 Reader
- Part Number
UA-G3-W
- Color
White
- Specifications
Hardware Indoor and Outdoor Use Networking Interface: (1) 10/100 MbE RJ45 port Connectivity BLE 4.1 NFC Power Method PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU Max. Power Consumption: 5W Supported Voltage Range: 48V DC ESD/EMP Protection: Air: ±15kV, contact: ±8kV Proximity sensor Speaker LEDs: R/G/B/W Learn More Button: (1) Factory-reset NFC Frequency: 13.56 MHz NFC Read Range: < 30 mm (1.18'') NFC Technology ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340) MIFARE Classic / MIFARE DESFIRE Sony FeliCa (ID only) NFC Forum tags T1T, T2T, T3T, T4T and T5T ECP 2.0 PoE Cabling Requirements: Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm2 ) for patch cords; 24 AWG (0.21 mm2 ) for horizontal or riser cable. UL 294 Level Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I UL 294 Statement: Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. CAN/ULC-60839-11-1 Grade: Grade assignment: I Certifications: CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 Document number, and issue date and/or revision level: UA-G3, V01 NDAA Compliant
- First Listed on Newegg
March 28, 2025