About this item
SmartPro 120V 1.5kVA 980W Line-Interactive UPS, Tower, USB, DB9, 6 Outlets
- Features
- 1.5kVA / 1500VA line interactive tower UPS system
- Corrects brownouts and overvoltages from 75V to 147V
- USB & RS232 ports, 1 switched load bank, Hot-swap batteries
- NEMA 5-15P input, 6 5-15R outlets
Specifications
- Brand
TRIPP LITE
- Model
SMART1500
- VA Rating
1500 VA
- Watts
980 Watts
- Output Voltage
LINE MODE: Sine wave line voltage 120V (-18% / +8%) BATTERY MODE: PWM sine wave output 115V +/-5%
- Outlets
6
- Outlet Type
NEMA 5-15R
- Battery Type
Valve Regulated Lead Acid (VRLA)
- Battery Run Time
Full load runtime 7 minutes (1500 VA) Half load runtime 20 minutes (750 VA)
- Battery Recharge Time
2-4 hours to 90%
- Alarms
Audible alarm indicates power failure conditions (4 short beeps every 10 seconds), overload (continuous short beeps) and low battery (continuous tone)
- Interface Port
RS-232, USB
- Approvals
Tested to UL1778 (USA), cUL (Canada), Class A (emissions), NOM (Mexico)
- Surge Energy Rating
480 Joules
- Features
Applications Ideal for the protection of fileservers, network accessories and telecommunications equipment. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems. Ideal for sensitive electronic applications in areas where brownouts and overvoltages are common. 1500 VA / 980 Watts power handling capability supports a variety of networking, telecom and various other application types Built-in voltage regulation and battery support, plus complete AC suppression prevents equipment damage, data loss and downtime Large internal batteries offer 20 minutes half load runtime and 7 minutes at full load during power failures Automatic Voltage Regulation (AVR) circuits with two boost and one voltage reduction level maintains usable 120V nominal output over an input voltage range of 75-147V Includes a total of 6 NEMA5-15R outlets, 1 of which can be individually powered on and off via software interface to selectively reboot remote equipment or shed less significant loads to extend battery runtime for more critical equipment Includes 1 USB and 1 DB9 monitoring port for remote monitoring of UPS status and site power conditions Communications ports enable safe unattended shutdown without data loss during extended power failures Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power-restored, AC line voltage, DC battery voltage and battery capacity Communications ports support timed inverter shutoff after unattended shutdown, activate self-test and 10 second reboot of connected equipment
- Dimensions
12.75" x 7.50" x 9.00"
- Weight
38.4 lbs.
- Package Contents
SMART1500 UPS Driver Disk USB Cable User Manual RS-232 Cable
- First Listed on Newegg
August 12, 2005