IZI1

SIMCOM LTE Cat4 module SIM7600G-H Raspberry Pi 4G Module Expansion Board GNSS Module Global Communication Compatible with 3G/2G

No reviews
Newegg
USD 248.79

at Newegg

About this item

Origin:Mainland China Model Number:SIM7600G-H 4G HAT

Based on Raspberry Pi 40PIN GPIO interface design, suitable for Raspberry Pi series motherboards, Jetson Nano Support dial-up Internet, telephone, SMS, TCP, UDP, DTMF, HTTP, FTP and other functions Support GPS, Beidou, Glonass, GALILEO, QZSS, LBS base station positioning The onboard USB interface can be used to test AT commands, obtain GPS positioning information, etc. Onboard CP2102 USB to UART chip, convenient for serial port debugging Leads out module UART and other control interfaces for easy access to main control boards such as Arduino/STM32 Onboard SIM card slot, support 1.8V and 3V SIM card The onboard TF card slot can be used to store files, text messages and other data Onboard audio interface and audio decoder chip, which can be used for voice operations such as phone calls There are 2 LED indicators on board for easy viewing of the module's operating status Onboard level conversion circuit, can switch 3.3V/5V working level through jumper cap Support baud rate range: 300bps ~ 4Mbps (the default is 115200bps) Support automatic identification of baud rate (9600bps ~ 115200bps) Support AT command control (based on 3GPP TS 27.007, 27.005 and V.25TER command set) Support SIM application kit: SAT level 3, GSM 11.14 Release 99, USAT Provide complete supporting information manual (Raspberry Pi/Jetson Nano/Arduino/STM32 sample program) Product parameter Frequency Transmission rate GNSS parameters Receive 16 channels C/A Code Sensitivity Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (Beidou) Cold start: -148 dBm First positioning time (open area) Cold start: Hot start: SMS and audio parameters Short Message (SMS): Support types: MT, MO, CB, Text, PDU SMS storage devices: USIM card and ME (default) Audio features: support echo cancellation function support noise suppression function Other parameters Supply voltage 5V Working voltage 5V / 3.3V (can be switched by jumper cap) Working temperature -30°C ~ 80°C Storage temperature -45°C ~ 90°C 1.SIM7600G-H module 2.CP2102 USB to UART chip 3.NAU8810 audio decoder chip 4.TXS0108EPWR level conversion chip Can convert 3.3V/5V level to 1.8V 5.MP2128DT power chip 6.SPX29302 power chip 7.Raspberry Pi GPIO interface Easy access to Raspberry Pi 8.SIM7600 control interface Convenient access to main control boards such as Arduino/STM32 9.SIM card slot Support 1.8V and 3V SIM card 10.TF card slot Can be used to store data such as files or text messages 11.3.5mm headphone/microphone interface Can be used for voice operations such as phone calls 12.USB interface Can be used to test AT commands and get GPS Positioning information, etc. 13.USB TO UART interface Can be used for serial port debugging or logging in to Raspberry Pi 14.MAIN main antenna interface 15.AUX auxiliary antenna interface 16.GNSS antenna interface 17.Module switch button 18.Network status indicator 19.Power Indicator 20.Working level selection The 3.3V/5V working level can be switched by re-welding 0 ohm resistance VCCIO-3.3V: working level is 3.3V VCCIO-5V: The working level is 5V 21.UART selector switch A: USB to serial port access to Raspberry Pi B: Raspberry Pi controls SIM7600 C: USB to serial port control SIM7600 22.PWR / Flight setting jumper PWR-3V3: power on automatically (connected by default) PWR-D6: Raspberry Pi D6 pin control switch Flight-D4: Not connected by default, connect, you can set the flight mode through D4 23.USB interface pins reserved solder joints 24.BOOT compulsory programming reserved solder joints SIM7600G-H 4G HAT × 1 LTE antenna × 1 GPS External Antenna (B) × 1 USB cable type A male port to micro male port ×2 RPi copper pillar package (2PCS set) ×1

  • Features
    • SIMCOM LTE Cat4 module SIM7600G-H Raspberry Pi 4G Module Expansion Board GNSS Module Global Communication Compatible with 3G/2G

Specifications

First Listed on Newegg

July 14, 2026

Product photos are for illustrative purposes only and are exemplary. The colors, inscriptions, parameters, dimensions, sizes, functions, and/or any other features of the original products may look different than in reality due to their visual characteristics, so please refer to the product features that are indicated in the product descriptions.

You may also like