Shure ANI22BLOCK Audio Network Interface (Block Connectors)
at B&H Photo Video
About this item
The ANI22 Audio Network Interface from Shure is designed to bring up to two line/mic signals onto or from a Dante network. It can be utilized for easy audio routing and convenient browser-based remote control. In addition, it is built with analog block connectors.
- Features
- For Conferencing Applications
- Analog XLR Connectors
- Converts 2 Mic/Line Signals to Dante
- Power over Ethernet (PoE)
Specifications
- Inputs (Analog)
2 x 6-pin block connectors
- Outputs (Analog)
2 x 3-pin block connectors
- Dante Connection
1 x RJ45 Channel Count: 2 inputs, 2 outputs
- Polarity
Non-inverting, any input to any output
- Power Requirements
Power over Ethernet (PoE), Class 0 (PoE Plus compatible)
- Power Consumption
11 W maximum
- Application Control
HTML5
- Operating Temperature Range
20 to 104°F (-6.7 to 40°C)
- Storage Temperature Range
20 to 165°F (-29 to 74°C)
- Thermal Dissipation
Maximum: 12.1 W (41.3 BTU/hr) Typical: 9.8 W (33.7 BTU/hr)
- Frequency Response
20 Hz to 20 kHz ±1 dB
- Dante Audio Flows
Sampling Rate: 24-bit/48 kHz
- Latency
Does not include Dante latency Analog to Dante: 0.35 ms Dante to Analog: 0.71 ms
- Analog Gain Range
51 dB (adjustable in 3 dB steps)
- Dynamic Range
113 dB, 20 Hz to 20 kHz, A-weighted, typical
- Equivalent Input Noise
20 Hz to 20 kHz, A-weighted, input terminated with 150 Ohms Analog Gain Setting = +0 dB, -93 dBV Analog Gain Setting = +27 dB, -119 dBV Analog Gain Settings = +51 dB, -130 dBV
- Total Harmonic Distortion (THD)
<0.05% @ 1 kHz, 0 dBV input, 0 dB analog gain
- Common Mode Rejection Ratio
70 dB, 50 Ohms balanced source @ 1 kHz
- Input Impedance
5 kOhms
- Output Impedance
150 Ohms
- Input Clipping Level
Analog Gain Setting = +0 dB, +20 dBV Analog Gain Setting = +27 dB, -7 dBV Analog Gain Setting = +51 dB, -31 dBV
- Analog Output Levels
Selectable Line 0 dB Aux -20 dB Mic -46 dB
- Digital Signal Processing (DSP)
Per Channel: Equalizer (4-band Parametric, Dante channels only), Mute, Limiter, Gain (140 dB range) System: Channel Summing
- Networking
Cat 5e or higher (shielded cable recommended)
- Dimensions
1.6 x 5.5 x 5.0" (4 x 14 x 12.8 cm)
- Weight
1.5 lb (672 g)
- Package Weight
2.7 lb
- Box Dimensions (LxWxH)
10.1 x 6.6 x 3.3"