RDL Format-A Two-Pair Audio Sender
at B&H Photo Video
About this item
The Format-A Two-Pair Audio Sender from Radio Design Labs accepts either a stereo line-level or 1 to 3W mono-amplified, fixed-level signal, usually from a TV located in commercial hospitality centers. The audio sender distributes the source signal to two Format-A output jacks to feed multiple Format-A receivers. The input accepts either an unbalanced stereo or an amplified mono input. This sender sends the unbalanced left and right sources over balanced twisted-pair cables on pairs B and C. If a mono-amplified source is connected, the mono signal is fed to both pairs B and C. Audio circuitry is active balanced for superior audio fidelity and low-noise performance. This audio sender is normally mounted behind a TV where AC power is available.
- Features
- Format-A Sender from TV Fixed Audio Out
- Sends Left and Right Audio Channels
- Unbalanced Stereo Input
- Balanced Audio Input from Mono Amplifier
Specifications
- Input
3 20 kΩ unbalanced (2, left and right)100 kΩ balanced (mono amplified)
- Input Connections
Unbalanced: Phono jack Balanced: Mini-jack
- Input Level
-10 dBV unbalanced; 1 W (8 Ω) to 10 W (8 Ω) balanced, 2 W nominal
- Pairs
Format-A Signal Pairs Used: 2 (B, C)
- Output
RDL TP Format-A
- Output Connection
RJ45
- Frequency Response
10 Hz to 50 kHz (± 0.1 dB)
- THD + N
<0.05%
- Noise
Noise below +4 dBu: <-85 dB
- Crosstalk
<-85 dB (10 Hz to 10 kHz); <-80 dB (10 kHz to 20 kHz)
- Headroom
Headroom above +4 dBu: >18 dB
- Indicators
Power (Input and output active)
- Power Connections
Power jack (locking)
- Power Requirement
24 VDC @ 30 mA plus connected loads
- Load
Maximum Load Current: 500 mA
- Dimensions
4.1 x 3.2 x 1.6" (10.5 x 8.6 x 4.2 cm)
- Package Weight
0.575 lb
- Box Dimensions (LxWxH)
4.9 x 4.4 x 1"