Radial Engineering StageBug SB-6 Isolator
at B&H Photo Video
About this item
Eliminating hum and buzz caused by ground loops for a variety of audio signal types, the StageBug SB-6 Isolator from Radial Engineering is a 2-channel device that features 1/4" inputs and outputs for both Hi and Lo-Z signals, with the ability to convert one to the other depending on the connectors in use. Its dual linear Eclipse transformers are designed to provide flat response from 20 Hz to 20 kHz, and provides you with a phase reverse switch for phase alignment of stereo signals as well as a -15dB pad.
- Features
- Eliminates Hum and Buzz
- Supports Hi or Lo-Z Inputs & Outputs
- 1/4" I/O
- Able to Convert Hi and Lo-Z Signals
Specifications
- Audio Circuit Type
Passive transformers
- Frequency Response
20 Hz to 20 kHz +/-1 db
- Dynamic Range
140 dB
- Maximum Input
+25 dBu
- Gain
-2 dB
- Total Harmonic Distortion
<0.0008% @ 1 kHz
- Phase Deviation
5° @ 30 Hz
- Input Impedance
Varies with load 47 KΩ
- Output Impedance
600 Ω
- Features
Transformer: Eclipse custom Input Pad: -15 dB Polarity: 180° reverse Ground Lift: Disconnects TRS sleeve at output
- Input Connector
1/4" (6.3 mm) TRS phone
- Output Connector
1/4" (6.3 mm) TRS phone
- Construction
14 gauge steel chassis & outer shell
- Power
Passive, no power required
- Operating Conditions
For use in dry locations only between 41 to 104°F (5 to 40°)
- Dimensions
4.50 x 1.85 x 1.35" (114 x 47 x 34 mm)
- Weight
0.9 lb (408 g)
- Package Weight
1 lb
- Box Dimensions (LxWxH)
7.3 x 4.7 x 2.1"