IZI1

Radial Engineering ProMS2 Passive Microphone Splitter

‎4/5
4 reviews
B&H Photo Video
USD 179.99

at B&H Photo Video

About this item

Allowing you to send a single microphone or DI signal to up to 3 separate destinations, the ProMS2 Passive Microphone Splitter from Radial Engineering can be used in the studio to send a mic to multiple preamps for auditioning and live to send one source to multiple mixers or to supply a broadcast feed. It is a passive device, therefore requiring no power for operation. The Eclipse ET-MS10 transformer is designed to provide a flat frequency response while its RF filtering helps keep your signal interference free. The device features 14-gauge steel construction to stand up to live use.

  • Features
    • Splits 1 Input to 3 Outputs
    • Passive Design Requires No Power
    • Eclipse ET-MS10 Transformer
    • Steel Body

Specifications

Audio Circuit Type

Passive

Input Impedance

2.5 KΩ, unbalanced

Output Impedance

140 KΩ, balanced

Frequency Response

20 Hz to 20 kHz (+0 dB -1 dB)

Gain

-0.5 dB

Dynamic Range

140 dB

Total Harmonic Distortion

0.001%

Noise Floor

-140 dB

Maximum Input

+26 dBu

Phase Deviation

1° @ 20 Hz

Intermodulation Distortion

0.003%

CMRR

-115 dB at 60 Hz

Transformer

Eclipse ET-MS10

Pad

-30 dB

Ground Lift

Disconnects pin-1 at both XLR outputs

XLR Configuration

AES standard pin-1 ground, pin-2 (+), pin-3 (-)

Connectors

XLR-F in, XLR-M direct; direct-2; isolated outputs

Construction

14 gauge steel chassis & outer shell

Power

Passive, no power required

Operating Conditions

For use in dry locations only between 41 to 104°F (5 to 40°)

Dimensions

3.3 x 5.0 x 2" (84 x 127 x 48 mm)

Weight

1.55 lb (0.7 kg)

Package Weight

1.7 lb

Box Dimensions (LxWxH)

6.25 x 4.15 x 3"

Product photos are for illustrative purposes only and are exemplary. The colors, inscriptions, parameters, dimensions, sizes, functions, and/or any other features of the original products may look different than in reality due to their visual characteristics, so please refer to the product features that are indicated in the product descriptions.

You may also like