About this item
The JDI Duplex from Radial Engineering is a two-channel version of the JDI passive direct box that converts hi-impedance instrument signals to two balanced, low-impedance outputs, allowing long cable runs without noise. The unit is ideally suited for all instruments including keyboards, bass guitar, and acoustic guitars for use in studio, broadcast, and live sound reinforcement.
- Features
- Handles Extreme Signal Levels
- Built-In Jensen JT-DB-PEC Transformers
- 1.4", RCA, 3.5mm & XLR Inputs
- Pad, Polarization, Ground-Lift Switches
Specifications
- Item Type
Standard DI
- Number of Channels
2-Channel
- Active/Passive
Passive
- Circuitry
Solid-State
- Pad
-15 dB
- Ground Lift
Yes
- Polarity Reverse
Yes
- Low-Cut/High-Pass Filter
No
- Audio I/O
2x XLR 3-Pin Balanced Input2x 1/4" TS Unbalanced Input2x 1/4" TS Unbalanced Thru1x Stereo 2RCA Unbalanced Input1x Stereo 2RCA Unbalanced Thru1x 1/8" / 3.5 mm TRS Unbalanced Stereo Input2x XLR 3-Pin Balanced Output
- Merge/Summing
Selectable Input & Thru Merge
- Frequency Response
20 Hz to 20 kHz ±0.2 dB
- Maximum Input Level
+20 dB
- Input Impedance
140 Kilohms (Pad Off)10 Kilohms (Pad On)
- Total Harmonic Distortion/Noise
0.001% (at 1 kHz +4 dBu, 600 Ohms Load)
- Operating Voltage
No Power Required
- Dimensions
6.3 x 5 x 1.9" / 160 x 127 x 48 mm
- Weight
2.2 lb / 1 kg
- Package Weight
2.78 lb
- Box Dimensions (LxWxH)
11.75 x 5.05 x 2.65"