Plug & Mix VIP Bundle

The VIP Bundle from Plug & Mix is a massive and highly economical software bundle that provides you with instant access to 50 high-quality audio plug-ins, ranging from virtual cabs, pedals, and IR libraries, to wide ranging FX, EQ, and processors. This staggering volume of software will completely unleash your creativity, delivering an entire studio's worth of plug-ins, while remaining future-proof by ensuring any future software editions are free of charge.

Controls

The American Tweed amp emulation features six knobs, two switches, and three buttons, including:

Drive: Adds more distortion

Bass: Adds less or more low frequencies

Middle: Adds less or more middle frequencies

Treble: Adds less or more high frequencies

Stereo: Creates stereo output signal

Boost: Provides further gain boosting

In: Controls the input level of the plug-in

Out: Controls the output level of the plug-in

Off: Bypass selection

Off Axis: Moves virtual mic placement off axis from speaker

On Axis: Moves virtual mic placement on axis from speaker

Controls

The Analoger effect plug-in features five knobs and three buttons, including:

Drive: Adds more or less tape and/or tube drive sound

Lows: Adds more low frequencies

Highs: Adds more high frequencies

Tube: Adds tube crunch to your signals

Tape: Adds tape saturation to your signals

Mixed: Combines tube crunch and tape saturation

Out: Controls the output level of the plug-in

Mix: Dry/wet mix of the plug-in

Controls

The Basspeg amp emulation plug-in features four knobs, two switches, and three buttons, including:

Drive: Adds more or less tube overdrive/distortion

Bass: Adds more or less low frequencies

Midrange: Adds more or less mid frequencies

Highs: Adds more or less high frequencies

Deep: Low-frequency contour switch

Bright: High-frequency boost switch

Off: Switches to straight DI emulation

Dyn: Activates dynamic-style mic emulation

Cond: Activates condenser-style mic emulation

In: Controls the input level of the plug-in

Out: Controls the output level of the plug-in

Controls

The brightness plug-in features three knobs, three buttons, and one switch, including:

Brightness: Adds less or more brightness to your signals ±10 dB

Selection buttons: Select the frequency to boost or attenuate: 2.8, 3.6, or 10 kHz

Clipper: Turns on the built-in limiter to prevent peaking

In: Controls the input level of the plug-in

Out: Controls the output level of the plug-in

Controls

The British Tone amp emulation features six knobs, two switches, and three buttons, including:

Drive: Adds more distortion

Bass: Adds less or more low frequencies

Middle: Adds less or more middle frequencies

Treble: Adds less or more high frequencies

Stereo: Creates stereo output signal

Boost: Provides further gain boosting

In: Controls the input level of the plug-in

Out: Controls the output level of the plug-in

Off: Bypass selection

Off Axis: Moves virtual mic placement off axis from speaker

On Axis: Moves virtual mic placement on axis from speaker

Controls

The British Tone amp emulation features six knobs, two switches, and three buttons, including:

Drive: Adds more distortion

Bass: Adds less or more low frequencies

Middle: Adds less or more middle frequencies

Treble: Adds less or more high frequencies

Stereo: Creates stereo output signal

Boost: Provides further gain boosting

In: Controls the input level of the plug-in

Out: Controls the output level of the plug-in

Off: Bypass selection (preamp only)

Off Axis: Moves virtual mic placement off axis from speaker

On Axis: Moves virtual mic placement on axis from speaker

Controls

The Chorus Ensemble effect plug-in features six knobs and three buttons, including:

FX Level: Adds more or less chorus effect to your track

Delay: Increases or decreases the timing of the chorus effect

Color: Changes the tone of the chorus effect to be darker or brighter

Stereo: Controls the stereo width of the effect

Boost: Provides further gain boosting

In: Controls the input level of the plug-in

Out: Controls the output level of the plug-in

Off: Bypass selection

Slow: A slow moving chorus effect for subtle pulsating effects

Mellow: A moderate speed chorus effect for thickened sounds

Fast: A fast speed chorus effect for detuned flangerlike sounds

Controls

The Clarisonix effect plug-in features five knobs and three buttons, including:

Sub Level: Adds less or more gain to sub level

Lo Focus: Boosts low frequencies

Clarity: Adds more high frequencies

Selector Buttons: Choose between sub modes 1, 2, and 3, for emphasizing different sub frequencies

In: Controls the input level of the plug-in

Out: Controls the output level of the plug-in

Controls

The Chorus Ensemble effect plug-in features six knobs and three buttons, including:

Speed: Changes the speed/rate of the flanging effect

Depth: Changes the depth of the flanging effect

Sync: Synchronizes the speed/rate of the flanger to your host BPM

Feedback: Adds positive or negative feedback

Selector Buttons: Choose between Classic, M-Tron, and Stomp derived flanger effects

Mix: Dry/wet mix of the plug-in

Out: Controls the output level of the plug-in

Controls

The Classic Phaser effect plug-in features five knobs, one switch, and three buttons, including:

Speed: Changes the speed/rate of the phaser effect

Frequency Range: Changes the depth of the phaser effect by increasing its sweep range

Sync: Synchronizes the speed/rate of the phaser to your host BPM

Resonance: Adds resonance to the sound of the phaser, causing it to ring out more

Selector Buttons: Choose between 4-, 6-, or 8-stage modes for more or less peaks and valleys

Mix: Dry/wet mix of the plug-in

Out: Controls the output level of the plug-in

Hendrix's Uni-Vibe Effect

Speed: Changes the speed of the Cool-Vibe effect.

Intensity: Changes the intensity of the effect.

Sync: Synchronizes the speed (rate) to your host BPM.

Width: Increases the stereo width of the effect.

Selector buttons: Choose between Sweet, Mellow, and Deep Vibe modes.

In: Controls the input level of the plug-in.

Out: Controls the output level of the plug-in.

Authorize up to five computers.

Controls

The Degradiator effect plug-in features six knobs and three buttons, including:

Crush: Controls severity of bit-crushing effect

Bit-Depth: Determines the bit-depth (24-bits to 1-bit)

Telephone: A bandpass filter that sweeps up to 20 kHz

Down-Sample: Selects sample rate (44.1, 48, 88.2, and 96 kHz)

Selector Buttons: Choose between three levels of bitcrushing

Mix: Dry/wet mix of the plug-in

Out: Controls the output level of the plug-in

Controls

The Deluxe Tilt filter plug-in features three knobs and three buttons, including:

Tilting: Turning the knob to the right not only acts as a treble boost, but also a bass cut, while turning it left performs the opposite function

Normal: This mode has a narrow Q

Mellow: This mode has a moderate Q

Lush: This mode has a wide Q

Controls

The Digital Plate reverb effect plug-in features four knobs including:

Time: Increases the time delay of the reverb effect

Color: Changes the tone of the reverb effect to be darker or brighter

Mix: Dry/wet mix of the plug-in

Level: Controls the output level of the plug-in

Controls

The Digital Reverb effect plug-in features six knobs and three buttons, including:

Decay Time: Increases the time of the reverb effect

ER Level: Controls the early refelction levels

Lows: Adds more low frequencies

Highs: Adds more high frequencies

Selector Buttons: Choose between small, medium, or large room sounds

Mix: Dry/wet mix of the plug-in

Level: Controls the output level of the plug-in

Controls

The Dimension 3D effect plug-in features three knobs and three buttons, including:

Detune: Gives you less or more of the classic detune effect

Selector Buttons: Choose between D1, D2, and D3 for three different levels of chorusing

In: Controls input level of the plug-in

Out: Controls the output level of the plug-in

Smooth Distortion Effect

Drive: Adds more distortion drive.

Low Cut: Cuts all frequencies below a certain point.

High Cut: Cuts all high frequencies above a certain point.

Mix: Dry/Wet Mix of the plug-in.

Out: Controls the output level of the plug-in.

Up to five computers can be authorized.

Echoplex-Based Tape-Delay Effect

Echo Time: Changes the echo time from 1 to1000 ms.

Tone: Determines the tone of the echoes.

Variation: Emulates the slight variations of tape-based delay.

Sustain: Increases the amount of feedback.

Sync: Synchronizes the speed (rate) of the EchoFlex to your host BPM.

Ping-Pong: Allows to switch from centered to ping-pong delay.

Mix: Dry/Wet Mix of the plug-in.

Out: Controls the output level of the plug-in.

Up to five computers can be authorized.

Transparent Optical Compression

Input Gain: Increases the amount of signal sent to the compressor.

Response: Determines the speed at which the compressor reacts to the incoming signal.

Output Gain: Increases the level of output for the compressor.

Soft Knee: Smooths out dynamic control.

Selector buttons: Choose between Off, 100, or 200 Hz to activate the internal frequency side-chain.

Up to five computers can be authorized.

Extreme EQ When Needed

Mix: Dry/Wet control.

Filter Type: Filter mode control blends between low-pass, band-pass, and high-pass modes.

Cutoff: Center frequency control for the filter.

Resonance: Resonance control for the filter.

Envelope Attack: Controls the time taken by the filter to sweep.

Envelope Decay: Controls the time taken by the filter to restore initial state.

Sweeper: Controls the sweep range.

Up to five computers can be authorized.

Gate and Expand Your Sound

Gate mode

Expander mode with set ratios (Exp 1 and Exp 2)

Sensitivity: Controls Gate threshold

Decay: Controls the time for the Gate to close after going below the threshold value

Activity LED: Illuminates green when gating is active

Reduction: Sets maximum applied gain reduction (in dB)

Selector: Gate (infinite ratio), Exp 1 (5:1), Exp 2 (2:1)

Input and output gain controls

Up to five computers can be authorized

Granular Delay Effect

Mix: Dry/Wet control.

Grains Rate: Controls grains repetition speed.

Grains Density: Duration control for the grains. The higher duration, the more overlapping grains generated, increasing sound density.

Grains Feedback: Controls amount of the output signal fed back to the input.

Grains Low-Pass: Low-pass-filter-cutoff control inserted into the feedback path. Simulates spectral loss in the feedback path.

Tune Pitch: Grains transposition control. Range -12 to +12 semitones.

Tune Random Pitch: Controls amount of random transposition added to each grain.

Up to five computers can be authorized.

EQ with Presence

Low Freq: Center frequency of the Low band. Range 40 to 150 Hz.

Low Gain: Gain control for the Low band.

Mid 1 Gain: Gain control for Mid 1 band (the band below 1 kHz).

MID 2 Gain: Gain control for Mid 2 band (the band between 2 and 3 kHz).

Air Shelf: Gain control for the AIR Band (high frequencies).

Air Freq: Bandwidth control for the AIR Band.

Up to five computers can be authorized.

Add Digital Low-Fidelity to Your Tracks

Mix: Dry/Wet control

Stereo: Widens the stereo field of the effect

Bit Depth: Reduces the bit depth from normal to Distroy

Decimator: Downsamples your signal until it is completely obliterated

Noise: Adds noise and hiss to your signal

Up to five computers can be authorized

Stereo Bass Booster

FREQ Hz: Adjusts the operating low frequency band width.

BOOST dB: Control additional boost applied to the low frequencies—Center frequency depends on FREQ value.

WIDTH: Stereo width control of the low frequencies—Can both expand or narrow the bass image.

Up to five computers can be authorized.

Classic Leslie Rotating Speaker

Mix: Dry/wet control.

Slow-Fast Switch: Speed control for the rotating speaker.

Bass: Speed control for the low frequency rotor.

Treble: Speed control for the high frequency rotor.

Accel: Controls the acceleration of the rotors when changing their rotation speed.

Balance: Controls the ratio between the output produced by the lower and upper rotors.

Spread: Controls the width of the stereo image.

Drive: Controls amount of saturation applied to the input sound.

Up to five computers can be authorized.

VOX Amplifiers Simulation

Drive: Adds more distortion drive.

Bass: Adds less or more low frequencies.

Middle: Adds less or more middle frequencies.

Treble: Adds less or more high frequencies.

Selector BTN: Off (bypassed), Off Axis mic or On Axis mic for speaker emulation.

In: Controls the input level of the plug-in.

Out: Controls the output level of the plug-in.

Up to five computers can be authorized.

Add Harmonics and Warmth to Your Tracks

Booster: Adds gain to the output without overloading the audio.

Warmth: Adds lows frequencies for a warmer sound.

Harmonics: Adds harmonic distortion and punch.

Details: Adds brilliance or high frequency.

Selector Buttons: Choose between Natural, Lush, and Mellow to control the overall tone.

Up to five computers can be authorized.

Classic Filter Pedal Plug-In

Mix: Dry/Wet control.

Cutoff: Controls the cutoff frequency of the filter.

Saturation: Drives the filter and causes crunch distortion tones.

Resonance: Determines the strength of the filter at it’s cutoff.

Trigger: Sets the speed of the filter envelope.

Depth: Sets the depth of the filter envelope.

Filter Mode: Choose from Low-Pass, High-Pass, or Band-Pass filter types.

Up to five computers can be authorized.

Classic Filter Pedal Plug-In

Mix: Dry/Wet control.

Speed: Controls the timing of the initial echo.

Sync: Allows you to sync the delay with your master tempo.

Color: Dials in the brightness or darkness of the echo.

Repeat: Turns up the feedback of the effect.

Pod: Sets the position of the playhead for each individual delay tap.

Pan: Sets the pan of each of the 5 delay taps.

Lev: Sets the level for each delay tap.

Up to five computers can be authorized.

Vintage Wah-Wah Pedal

MIX: Dry/Wet control.

FILTER CENTER: Center frequency control for the filter. The control is equal to the pedal pressure level.

ENVELOPE SPEED: Controls the time taken by the filter to sweep from Center frequency to Center plus Depth and back.

ENVELOPE DEPTH: Controls the sweep range.

ENVELOPE SENS: Controls envelope sensitivity. Used for tuning to match input sound level.

Up to five computers can be authorized.

Add Extra Low End to Your Music

Dry: Controls the level of the input sound in the mix.

1 Oct: Controls the level of the sound one octave below in the mix.

2 Oct: Controls the level of the sound two octave below in the mix.

Filter: Filter control used to adjust timbres of the generated signals.

Up to five computers can be authorized.

Classic Dual Pitch Shifter

Independent left and right pitch shifting

Link control for setting opposing +/- values each side—offset remains as you adjust

Up to five computers can be authorized

Unique Ring Modulator Plug-In

Mix: Dry/Wet control.

Frequency: Frequency control for the internal oscillator.

Sharpness: Controls amount of the saturation inside the internal oscillator.

Feedback: Controls amount of FM feedback applied to the input signal.

Authorize up to five computers.

API-Like Classic EQ

Compression: Determines the amount of gain reduction applied to the input signal.

Attack: Adjusts the speed of the compressor’s attack.

Release: Adjusts the speed of the release of the compressor.

Selector buttons: Choose between R-2, R-4, and R-8 to increase the effect of compression.

Trim: Controls the level of the input signal.

Make Up: Controls the output level of the plug-in.

Up to five computers can be authorized.

API-Like Classic EQ

Top three knobs: Determine the current frequency to boost or cut.

Bottom three knobs: Gain knobs for Low, Middle, and High frequencies.

Selector buttons: Choose between Low-Shelf / Band-Pass, Band-Pass / Notch, and High-Shelf / Band-Pass filters

In: Controls the input level of the plug-in.

Out: Controls the output level of the plug-in.

Up to five computers authorization.

Quality-Sounding Retro Filter

Presence: Increase or decrease the sound of the filters on your track.

High Pass: This knob filters out frequencies below the specified point.

kHz: Determines the width of the band pass filter.

Low Pass: This knob filters out frequencies above the specified point.

Selector buttons: Choose between Low Shelf / Band Pass, Band Pass / Notch, and High Shelf / Band Pass.

In: Controls the input level of the plug-in.

Out: Controls the output level of the plug-in.

Quality-Sounding Limiter

Limit Level: Determines the amount of Gain Reduction on the input signal.

Recovery: Determines the amount of time it takes for the limiter to recover.

Mix: Dry/Wet Mix of the plug-in.

Limit, Comp 1, and Comp 2 buttons: Selects between Limiter, Comp 1, and Comp 2 settings.

Trim: Controls the level of the input signal.

Make Up: Controls the output level of the plug-in.

Up to five computers can be authorized.

Quality-Sounding Limiter

Quick and simple to use.

Frequency, threshold, and amount controls.

Side-Chain function.

Up to five computers can be authorized.

Hardcore Screaming Distortion

Mix: Dry/Wet control.

Cutoff: Frequency control for the low-pass filter.

Scream: Controls amount of the internal saturation.

Modes 1 to 3: Three types of distortion.

Output: Adjusts the output level.

Stereo Width Enlargement

Width: Controls the stereo-image width.

Center: Adjusts the center of the entire stereo image.

Balance: Adjusts the relative level of left and right channels.

Up to five computers can by authorized.

Creative Talk-Box and Vocoder Effects

Mix: Dry/Wet control.

Mouth: Blends between different vowels.

Pitch: Adjust the vowels pitch.

Envelope: Controls the speed the effect responds to sound dynamics.

Depth: Controls the depth the effect responds to sound dynamics.

Quality-Sounding Limiter

AMP TYPE: Select from 6 different classic amp types—Bass-Man, Twin Reverb, Prince Tone, JCM-800, 2000 Lead, AC-30

DRIVE: Controls the drive amount of the amp section.

CONTOUR: Switches on extra tone-shaping for added control.

CABINET: Switches on the cabinet emulator for authentic guitar amp mayhem.

BASS: Dials in the low end of the effect.

MIDDLE: Adjusts the midrange of your tone.

TREBLE: Adds bite to your signal.

Up to five computers authorization.

Create Punchy Drums

Output Gain—Increases or decreases the output of the plug-in.

Attack—Amplify or attenuate the transients of incoming signals.

Sustain—Amplify or attenuate the sustain of incoming signal.

Up to five computers can be authorized.

Versatile Tremolo and Panning Effect

Speed: Changes the speed of the Tremolo Pan effect.

Depth: Changes the depth of the effect.

Sync: Synchronizes the speed (rate) of the Tremolo Pan to your host BPM.

Width: Increases the stereo width of the Tremolo Pan effect.

Selector buttons: Choose between Sine, Triangle, and Square Tremolo modes.

Up to five computers authorization.

Level Maximizer Powerhouse

Threshold—Gives you less or more gain reduction.

Release—Determines the speed at which the compressor releases.

Out—Controls the maximum output level of the plug-in.

Up to five computers can be authorized.

Good Vibes for Your sounds

Vibrato speed

Intensity

Width

Host tempo sync control

Up to five computers can be authorized

Old-School Flavor

Noise Mix: Controls the amount of vinyl noise added to the mix.

Noise Tone: Adjusts the noise shape.

Dust Rate: Controls the amount of dust on the emulated vinyl disk.

Dust Mix: Controls the level of the dust effect added to the mix.

Scratches Rate: Controls the amount of scratches on the emulated vinyl disk.

Scratches Mix: Controls the level of the scratches effect added to the mix.

Up to five computers can be authorized.

Create Vowel Overtones

Mix: Dry/Wet control.

Vowel: Dials in the vowel frequency and produce a vocal-like quality.

Shift: Changes the character of the tone from lower darker tones to brighter.

Envelope: Controls the speed of the envelope’s bite.

Depth: Controls the depth of the envelope.

Reso: Boosts the strength of the Vowel frequency.

Up to five computers authorization.