Non-Contact Phase Detector Digital Phase Sequence Tester Phase LED Indicator Clamp Positive/Reverse Phase Tester AC70~600V 50/60Hz

SpecificationModel : DYXZ-01Measure mode : Non-contact clipping methodFrequency : 50Hz/60HzLive electricity range : AC70600V50/60HzSine wave continuous inputMeasuring the highest voltage: AC600VClamp wire size : Outside diameter 17mmDisplay : Positive phaseR light turns on in a clockwise directionReverse phaseL detection light turns on counterclockwiseLive electricityA, B, C lights in the voltage setting rangeLack of phaseA or B or C lights are not litMotor steering: Motor rotates clockwise : R light is onMotor rotates anticlockwise: L light is onClamp lead length: 0.5 mMaximum rated power : 300mVAInsulation strength : 5.4 kVrmsPower : DC3V 2xAA 1.5V batteryAuto Power off : After 5 minutes, the meter automatically off powerWorking Temperature and Humidity : -1055; below 80%rhStorage Temperature and Humidity : -2060 ; below 90%rhWeight : about 150gSize : 110mm x 70mm x 30mmPackage size: 20x12x5cmPackage weight : 325g Features : Multi-Function : Phase detection (normal phase, reverse phase), live line inspection, simple electricity inspection, phase loss judgment, motor steering detection, circuit breaker search, breakpoint location, and line maintenance. LED dynamic display, intuitive and clear. Easy to read. The phase sequence table of the three exposed clips or test pins are connected to the exposed three fire lines. Measure mode : Non-contact clipping method. It does not need to open the wire, and does not need to touch the high voltage exposed live wire. It can directly detect the phase sequence by sandwiching the three super induction high-insulation clamps to clamp the three-phase live wire insulation sheath.