Miops Camera Trigger with Shutter Release Cable for Sony Multi-Terminal K

A unique triggering system, the MIOPS Camera Trigger with Shutter Release Cable for Sony Multi-Terminal Kit from B&H bundles the lightning, sound, and laser-activated trigger with a 2.5mm to multi-terminal cable for Sony cameras.

Lightning Mode

A built-in light sensor detects changes in light and triggers your camera's shutter in just a few nanoseconds. You can capture only bright lightning strikes, or the smallest strikes, simply by adjusting the sensitivity. This mode can also be used to capture fireworks, or other events where you need to capture images based on changes in light.

Laser Mode

The MIOPS has a built-in sensor to detect when a laser beam is broken, thereby triggering your camera's shutter. This is useful for detecting subjects such as water drops, animals, or intruders when conducting surveillance.

Sound Mode

MIOPS's built-in microphone can detect sound, triggering your camera or flash to capture things like breaking glass, or a popping balloon. You can adjust the delay of the trigger as well as the sensitivity of amount of sound needed to trigger the shutter.

Timelapse Mode

This mode lets you specify the interval time anywhere between one second and one hour, as well as how many photos to take. The LCD screen will turn off to save energy, allowing you to take a timelapse photo for days, or even months if you use an external power source.

HDR Mode

Even if your camera doesn't have a bracketing feature, MIOPS allows you to set a center exposure, as well as the over and under exposures needed in order to make an HDR image.

External Port

A port on the MIOPS can accept any external trigger that has an output signal between 0V and 3V, such as a temperature, pressure, or humidity sensor.

Combining Sensors

You can combine sensors with MIOPS's Scenario feature by creating a custom scenarios with up to five different steps. For example, you can set the MIOPS to start taking timelapse photos only after it detects lightning.

Triggering Your Camera and Flash

MIOPS has two dedicated outputs, one for a flash, and another for a camera. They are electrically isolated from each other, reducing risk of a short circuit. The MIOPS trigger can be used with multiple cameras (not simultaneously) by simply changing the camera connection cable.

Mini-USB Port

The mini-USB port allows you to charge your Li-ion battery, as well as update the MIOPS's firmware.

Compatibility

MIOPS can be used with any cameras which have a remote shutter trigger port or an IR port, and any and flash units with a PC sync jack.

Compatibility

Sony: Alpha: a1, a9 III, a9 II, a9, a7S III, a7S II, a7S, a7R V, a7R IV, a7R III, a7R II, a7R, a7 IV, a7 III, a7 II, a7, a6600, a6500, a6400, 6300, a6100, a6000, a5100, a5000, a3000, a99 II, a77 II, a68, a58 Cyber-shot: RX1R II, RX10 IV, RX10 III, RX10 II, RX10, RX100 VII, RX100 VI, DSC-RX100 VA, RX100 V, RX100 IV, RX100 III, RX100 II, HX50V, HX90V, HX400V, HX400, HX300, and ZV-1