About this item
Turn your DJI gimbal into a PTZ camera head with the APC-R Mini Gimbal Controller from Middle Things. This compact device mounts onto your compatible DJI gimbal's RSA port using two screws, and it provides Ethernet, Wi-Fi, and Bluetooth connectivity to control your camera and gimbal as if it is a PTZ camera. It offers wide compatibility with DJI gimbals and Blackmagic cameras and features a built-in tally light.
Multiple Control Options
Mounting the APC-R Mini onto your gimbal facilitates multiple control options over your local network:
USB gaming joysticks
Middle Remote
BitFocus Companion
TCP Access with the SDK/API
Remote Gimbal Control
The APC-R Mini connects to and draws power directly from the RSA accessory port of your DJI RS 2, RS 2 Pro, RS 3 Pro, RS 4, or RS 4 Pro gimbal. You can then connect it to your network using LAN Ethernet (recommended) or Wi-Fi.
Remote Camera Control
If you use supported Blackmagic Design cameras, you can also remotely control the shutter, iris, white balance, gain, and focus in addition to the PTZ/roll/speed of the gimbal motor.
USB-C Connectivity
With the built-in USB-C connection, you can:
Adjust network settings, set custom IP addresses, and configure the Wi-Fi SSID and password when using it as a wireless controller.
Update your APC-R Mini with the latest firmware.
Power your APC-R Mini when using it as a wireless camera controller without a gimbal.
DJI Active Track with RavenEye
If you are utilizing DJI's RavenEye system, your camera can track a subject automatically on autopilot mode.
Compact Design
The APC-R Mini retains the same internal electronics and features as the APC-R but boasts a completely new design. This design combines the APC-R, the APC-R Gimbal Adapter, and the Middle Tally into a single compact product that connects directly to your DJI Gimbal.
Wireless Camera Control with Blackmagic
When connected to a Blackmagic ATEM Switcher over Wi-Fi or Ethernet, the APC-R Mini can use all the ATEM Software Control camera controls and forward them to the Blackmagic camera using Bluetooth.
Remote Gimbal Control Functions
The DJI RS 2, RS 3 Pro, RS 4, and RS 4 Pro are the only gimbals that support the following features:
Save and Recall position presets
DJI Focus Motor Control
DJI Active Track with DJI RavenEye system
Bitfocus Companion/Streamdeck Support
The APC-R Mini can be controlled using a Streamdeck through BitFocus companion. With a Streamdeck, you can not only control, adjust, and monitor camera and gimbal settings, butyou can also save and recall presets, rename presets, create custom pages, and use data from the gimbal and camera as variables for other Companion integrations.
Blackmagic ATEM Compatibility
An ATEM Switcher is not required to use the APC-R Mini, but it is recommended.
ATEM Mini / Mini Pro / Extreme (and ISO)
ATEM SDI / Pro ISO / Extreme ISO
ATEM Television Studio HD
ATEM Television Studio HD8 / 4K8
ATEM Television Studio Pro HD
ATEM Television Studio Pro 4K
ATEM Production Studio 4K
ATEM 1M/E & 2M/E Production Studio 4K
ATEM 4M/E Broadcast Studio 4K
ATEM Constellation HD / 4K / 8K
Supported ATEM Switcher/Camera Settings
When used with compatible ATEM Switchers and Cameras, the APC-R Mini can adjust the following settings remotely through Bluetooth:
iris
rec start/stop
shutter
gain (ISO)
white balance
zoom (with compatible lenses)
focus (with compatible lenses)
pan/tilt (with compatible gimbals)
contrast
saturation
hue
lift
gamma
gain
detail sharpening
false colors
status overlay
autofocus
Joystick Compatibility
The recommended joystick for your APC-R Mini is the Middle Remote because it has been optimized for the Middle Control software and offers the best possible control out of the box, but you can also use a standard USB gamepad controller.
Turtle Beach Velocity One
Thrustmaster TCA Sidestick Airbus Edition
Thrustmaster TCA Quadrant Airbus Edition
Thrustmaster T.Flight Hotas X
Thrustmaster USB Joystick
Microsoft Xbox One Wireless Controller V2
Logitech Extreme 3D Pro
Logitech Gamepad F310S
THE G-LAB K-PAD THORIUM
OS Compatibility
Middle Control/Setup software is compatible with the following operating systems:
iOS: Middle Setup software for iOS is required to pair APC-R Mini with your Blackmagic camera
macOS: Middle Control
Windows 10/11: Middle Control software is available for download, but it is no longer supported
- Features
- For Any Live Production Workflow
- Alternative to All-in-One PTZ Heads
- Middle Control Software Support
Specifications
- Compatibility
DJI Ronin Series Gimbals
- USB I/O
1 x USB-C (Power Only) Female Input
- Other I/O
1 x RJ45 Ethernet
- Wireless
Wi-Fi / Bluetooth
- Mobile App Compatible
Yes: iOS OnlyApp Name: Middle SetupFunctionality: Setup
- Power Source
USB
- DC Input Power
5 VDC
- Power Consumption
1 W
- Mounting
1x DJI RSA Connector2x Captive Screws
- Color
Black
- Dimensions
3.7 x 1.3 x 0.9" / 9.5 x 3.2 x 2.4 cm
- Weight
1.9 oz / 54 g
- Package Weight
0.135 lb
- Box Dimensions (LxWxH)
4.5 x 1.75 x 1.65"