Middle Things APC-R Controller

Turn your compatible DJI gimbal into a PTZ system with the Middle Things APC-R Controller, and take advantage of the smooth motor moves and sharp optics of your camera to create images without needing a discrete PTZ camera system. Each APC-R can control one gimbal/camera setup, and you can control up to eight setups from a single laptop using a single USB gaming-style controller. Combine the DJI gimbal with a compatible Blackmagic Design camera, and you get the equivalent of a high-end PTZ camera system.

Simple to Set Up

Run a single cable between the APC-R and your gimbal for communication and power.

For additional reliability use a wired Ethernet connection from the APC-R to your computer or network router.

The connection from the APC-R to the camera is via Bluetooth.

Remote Camera Control

Use compatible Blackmagic Design cameras on your gimbal to remotely control shutter/iris/white balance/gain/focus through Bluetooth in addition to the pan, tilt, roll, speed, or zoom motor of the gimbal.

When using an ATEM switcher, you can connect the Middle Control desktop software to the ATEM to control more advanced camera settings such as luma, gamma, lift, contrast, saturation, and sharpening.

Save Preset Positions

When using the APC-R with the DJI RS2, you can save custom camera position presets and recall them later. Store a custom white balance/ISO/iris/shutter/tint preset in addition to the pan/tilt/roll/zoom status of the gimbal when using a compatible Blackmagic Design camera and ATEM switcher. If you use an MFT lens with electronic communication, you can also save the lens focus distance.

Wireless

In addition to the built-in Ethernet port that offers a wired control solution, you can use the built-in Wi-Fi receiver to control the gimbal and camera completely wirelessly. When the Ethernet cable is disconnected, the APC-R will automatically switch to Wi-Fi within a few seconds.

When connected to an ATEM switcher over Wi-Fi, the APC-R grabs all the ATEM Software Control camera controls and forwards them to the Blackmagic camera using Bluetooth. Pair that with a video transmission system, and you have a fully wireless remote-controlled camera setup.

Two Included Software Apps

The Middle Setup iOS app allows you to adjust your APC-R settings easily via Bluetooth camera pairing for Wi-Fi and network settings, camera number, and more.

The Middle Control desktop app lets you control all your cameras and gimbals remotely from one laptop in your control room. You can connect up to four USB joysticks controllers, and map camera and gimbal settings to any joystick button or axis.

Compatible Gimbals

DJI Ronin RS2

DJI Ronin-S

DJI Ronin-SC

DJI Ronin-2

Compatible Cameras

Blackmagic Pocket Cinema Camera 6K

Blackmagic Pocket Cinema Camera 6K Pro

Blackmagic Ursa Broadcast

Blackmagic Ursa Mini Pro

Blackmagic Ursa Mini Pro G2

Blackmagic Pocket Cinema Camera 4K

Blackmagic Studio Camera 4K Pro

Blackmagic Studio Camera 4K Plus

Blackmagic Micro Studio 4K (needs its SDI IN connected to an ATEM PGM output and ATEM connected to Middle Control

Compatible ATEM Switchers

ATEM Mini/Mini Pro/Mini Pro ISO

ATEM Mini Extreme/Extreme ISO

ATEM Television Studio HD

ATEM Television Studio Pro HD

ATEM Television Studio Pro 4K

ATEM Production Studio 4K

ATEM 1M/E & 2M/E Production Studio 4K

ATEM 4M/E Broadcast Studio 4K

ATEM Constellation 8K