IZI1

JBL PRX ONE All-in-One Powered Column Array PA System Kit with Wireless Mic System, Carry Bag, Cable, and Stand

No reviews
B&H Photo Video
USD 1,299.95

at B&H Photo Video

About this item

Take your event to the next level with the B&H Kit, which combines the JBL PRX ONE All-in-One Powered Column Array PA System with Mixer and DSP with a wireless handheld microphone system and carrying bag, a tripod mic stand, a premium XLR cable, a foam windscreen. The kit is an fantastic turnkey solution for a portable audio system featuring a wireless microphone system, perfect for your next party or speaking engagement.

TX1000 Handheld Mic Tailored for Clear Vocals and Speech

The TX1000 handheld mic/transmitter is equipped with a dynamic mic capsule optimized for clarity and speech intelligibility. Its cardioid polar pattern focuses audio capture on the speaker or singer holding the mic, minimizing unwanted background noise and feedback.

Easy-to-Use System That's Quick to Set Up

Quick to set up with the press of a button, the receiver autoscans 100 selectable frequencies to locate a clean RF channel that's free from interference and delivers clear audio at a range up to 295'. Use the Set button to sync the receiver with the transmitter via IR, and you're ready to go.

The handheld mic/transmitter features a volume control to accommodate varying speech/vocal levels. It provides up to 12 hours of operation on two AA batteries with a battery-level indicator on both the transmitter and receiver, so you know when to replace the batteries.

Backlit LCD displays on the transmitter and receiver show frequency, mute status, battery life, and more.

The receiver's rear-panel connections include a balanced XLR and an unbalanced 1/4" output connector to connect to any mixing board or PA system.

The all-metal, half-rack receiver can be rackmounted in portable flight cases or for permanent installations with the included hardware.

WX1000HH Wireless System at a Glance

Handheld mic/transmitter included

Dynamic cardioid mic capsule

Frequency-agile design with 100 switchable frequencies

Up to 295' range between transmitter and receiver

XLR balanced and 1/4" unbalanced output connectors

For setups requiring multiple wireless microphones, up to 20 systems can operate at the same time

Rugged, all-metal construction

Autoscan finds the optimal frequency setting

IR sync wirelessly matches transmitter and receiver frequencies

Transmitter and receiver feature low battery indicators

Transmitter utilizes 2 AA Batteries for over 12 hours of operation

Rackmounting hardware and antenna relocation kit included

Fits a Single Mic Wireless System

Everything your sound engineer needs for a location shoot can be transported safely and comfortably in the Auray WSB-1S. There's room for a receiver, bodypack transmitter, handheld microphone, and accessories, such as lavalier mics, cables, and batteries.

Foam Cutouts

The dense foam pads are custom cut to fit your important audio devices and protect them from accidental bumps and shocks while traveling and during field recordings. Your receiver, transmitter, and handheld mic will be padded and held securely in place.

Front and Rear Access

The zippered front flap keeps your transmitter, receiver, and mic protected against the elements, as well as dust and debris, until you're ready to go to work. Then, you can unzip the flap and have complete access to the receiver's front panel. There's zippered access to the rear panel too, so you can run cables to and from the unit without any obstructions.

Accessory Compartment

There's a generous accessory compartment where you can stash cables, batteries, lavalier mics, and other accessories you need for the shoot. Put them all in the included accessory pouch to keep them organized and easy to find once you're ready to set up.

Space for Antennas

The bag is constructed with enough space in the rear compartment to accommodate a receiver's antennas, whether they're built in or attached separately.

Portable

Subjects can very easily move out of your microphone's transmission range. Say you're recording narration while your subject is hiking a trail or running up a football field. Throw the bag over your shoulder and keep up with them, so they'll never be out of range, and you'll get every word.

Auray MS-5230T Tripod Microphone Stand with Telescoping Boom

Fits these and other similar-sized microphones:

  • Features
    • 1500W of Power
    • 123 dB Maximum SPL
    • 10" Low-Frequency Woofer
    • 8 x 2" High-Frequency Drivers

Specifications

Speaker Configuration

1x 2-Way Speaker Column with Subwoofer

Number of Input Channels

5 (4 x Mono, 1 x Stereo)

Amplifier Power Rating

1500 W

HF Driver

8x 2" / 50.8 mm

LF Driver

1x 10" / 254 mm Woofer

Audio I/O

3x Combo XLR-1/4" TRS Balanced Mic/Line Input1x 1/4" TS Unbalanced Hi-Z Input1x 1/8" / 3.5 mm TRS Unbalanced Stereo Line Input1x 1/4" TRS Balanced Line Output/Thru

USB I/O

2x USB-A (Device Charging)

Wireless

Bluetooth 5.0

Enclosure Type

Bass-Reflex

Crossover

230 Hz

EQ

HF Shelf MF Notch/Peak LF Shelf

Semi-Parametric EQ

No

Effects

ReverbDelayChorus

Filters

No

Dynamic Processing

Limiter

Frequency Range

37 Hz to 20 kHz -10 dB45 Hz to 20 kHz ±3 dB

Maximum SPL

119 dB123 dB

Coverage Angle

170° H x 30° V

I/O Impedance

XLR Mic Input:4 Kilohms (Balanced) 1/4" TRS Low-Z Input:4 Kilohms (Balanced) 1/4" Hi-Z Input:2 Megohms (Unbalanced) 1/8" / 3.5 mm Line Input:10 Kilohms (Unbalanced)

Phantom Power

+48 V (Switchable)

Mobile App Compatible

Yes: Android & iOS

Battery Type

1x Built-In Rechargeable 36 V Lithium-Ion (Replaceable)

Approximate Battery Life

6 Hours

AC Input Power

100 to 120 VAC, 50 / 60 Hz

Power Consumption

300 W

AC Power I/O

1x IEC Input

Transport Options

1x Handle (Top)

Construction Material

Perforated Metal Grille, Polypropylene

Dimensions

28.7 x 24.7 x 17.8" / 729 x 627.4 x 452.1 mm

Weight

42.5 lb / 19.3 kg

Package Weight

50.08 lb

Box Dimensions (LxWxH)

28.5 x 24.25 x 17.25"

Product photos are for illustrative purposes only and are exemplary. The colors, inscriptions, parameters, dimensions, sizes, functions, and/or any other features of the original products may look different than in reality due to their visual characteristics, so please refer to the product features that are indicated in the product descriptions.

You may also like