Furman SmartSequencing Power Conditioner (20A)
at B&H Photo Video
About this item
The 20A SmartSequencing Power Conditioner from Furman is designed for commercial A/V installers and combines robust control capabilities via SmartSequencing Technology, advanced AC protection, AC noise filtration, and optional compatibility with the BlueBOLT Remote Power and Energy Management Platform (BB-RS232 adapter required and sold separately). It combines AC power distribution, protection, filtration, and sequential system power on/off in a 1RU, 120VAC, rackmount unit.
Surge Protection
SMP (Series Multi-Stage Protection) technology provides a high level of surge and spike protection. It ensures zero downtime for mission-critical installations by safely absorbing, clamping, and dissipating transient surges and spikes without damage to internal circuitry or connected equipment.
Noise Filtration
LiFT (Linear Filtration Technology) reduces AC noise linearly across a very wide bandwidth for enhanced audio and video clarity. LiFT ensures maximum performance from connected equipment.
Voltage Protection
Extreme Voltage Shutdown (EVS) circuitry safely powers down itself and connected equipment during unsafe voltage periods. EVS safeguards from catastrophic undervoltage (under 80V sustained) or overvoltage (over 145V sustained) conditions. Circuit may be set to auto-reset when voltage returns to normal or manual reset after an event is detected.
SmartSequencing
SmartSequencing allows bidirectional, safe sequenced power up/down operations of large and complex A/V systems via the push of a button or turn of a key, even by nontechnical personnel.
Diagnostic Lights
Diagnostic lights provide valuable system information including power quality, protection ok indicator, and extreme voltage indicator.
Remote Access (RS-232)
RS-232 compatibility and command set provide integration with control systems, open source, and control programming. RS-232 to Ethernet adapter (sold separately) allows for control, programming, and monitoring from any Web-enabled device via Telnet, direct HTTP connection, or Panamax/Furman's BlueBOLT platform.
BlueBOLT Compatible
BlueBOLT provides remote access to reboot components, power equipment on/off, and monitor power quality via the Internet from anywhere in the world.
Nine Total Outlets
The CN-2400S contains 8 rear-panel NEMA 5-20R outlets and 1 front panel NEMA 5-20R outlet.
Additional
Multiple units may be daisy-chained at runs of over 1000’ (304.8m) between units with bidirectional communications between units for sequencing on and off large and/or complex systems.
Security covers and sequence on/off keyswitch prevent unauthorized personnel from running/shutting down system or tampering with DIP switches.
Fire alarm shutoff
20A capacity
Safety agency (NRTL-C) listed and RoHS compliant
Faceplate with integrated rack ears: 19” (standard rack mounting width)
- Features
- 8 x NEMA 5-20R Rear Outlets
- 1 x NEMA 5-15R Front Outlet
- Surge and Voltage Protection
- Noise Filtration
Specifications
- Metering
None
- Battery Backup
No
- Outlets
2x NEMA 5-20R (Rear Panel, Unswitched, 1 Block-Sized)6x NEMA 5-20R (Rear Panel, Sequenced, 3 Block-Sized)1x NEMA 5-15R (Front Panel, Unswitched)
- Additional I/O
1x RJ452x Block 4-Pin (Sequencing)1x Block 5-Pin (Delay, Force-Off, Remote)1x DE-9/DB-9 (RS-232)
- Form Factor
Rackmount
- Type
Conditioner
- Amp Rating
20 A
- Number of Circuits
Not Specified by Manufacturer
- Typical Backup Runtime
Not Specified by Manufacturer
- Integrated Lamps
No
- Wall Plug Type
NEMA 5-20P
- Lamp I/O
No
- Wireless
No
- AC Input Power
90 to 139 VAC, 50 / 60 Hz
- DC Output Power
Not Specified by Manufacturer
- Output Current
20 A
- Load Capacity
Not Specified by Manufacturer
- Sequencing Delay
Fine-Tune Adjustable, 1 to 4 Minutes
- Protection Types & Modes
Line to Neutral, Zero Ground Leakage, Overvoltage, Series Multi-Stage Protection (SMP), Manual Reset, Auto-Reset
- Circuit Breaker
Yes: 20 A with Push-Button Reset
- Undervoltage Protection
77 V ± 3 V
- Overvoltage Protection
145 V ± 5 V
- Clamping Voltage
188 V at 3000 A
- Clamping Response Time
< 1 ns
- Maximum Spike Current
6500 A
- EMI/RFI Noise Filtration
10 dB (10 kHz, Linear Attenuation) 40 dB (100 kHz, Linear Attenuation) 50 dB (500 kHz, Linear Attenuation)
- Rackmount Size
1 U
- Cable Length
10' / 3 m
- Certifications
CSA, NRTL
- Operating Conditions
40 to 105°F / 5 to 40°C up to 90% Humidity
- Wire Gauge
12 AWG
- Dimensions
19 x 10.5 x 1.7" / 48.2 x 43.1 x 26.6 cm
- Weight
12 lb / 5.4 kg
- Package Weight
13.2 lb
- Box Dimensions (LxWxH)
21.5 x 14.5 x 4.5"