Focusrite RedNet R1 Desktop Remote Controller for Red Interfaces / Dante Devices
at B&H Photo Video
About this item
Put the power of your Red audio interfaces at your fingertips with the Focusrite RedNet R1, an immensely versatile desktop remote controller designed for professional engineers who demand intuitive, fast, and adaptable workflows in every environment from the studio to the dub stage.
Easy Access to Groups
RedNet R1 can be set up to control groups of outputs from the multitude of sources and destinations available to Red interface users. From Pro Tools | HD and other DAWs, analog inputs and outputs, ADAT and S/PDIF connections, and from entire Dante audio ecosystems, audio can be switched and summed cross platforms, simultaneously and interchangeably.
Comprehensive Controls
Top-panel controls include level, reference level preset selection, dim, mute, and a variety of solo modes. There's an A/B switch for switching between monitoring presets, and up to four fold-down presets to allow fast switching for checking downmixes.
Integrated Talkback
With Dante-enabled talkback, an internal mic preamp for connecting an external dynamic/condenser talkback mic (48V phantom power is selectable), a built-in microphone, and a high-powered headphones output, you can monitor audio inputs and outputs and interact with talent and other users on the system. Talkback functionality provides four destination groups when used with a Red interface, or a single talkback group when used with other Dante devices.
Dual LCD Screens
Two LCDs display highly accurate level metering of the outputs, sources, and headphone outputs, and provide visual cues for navigating menus. RedNet Control software is used to quickly set up both simple and complex monitoring and routing configurations. Other features include a 1/4" jack socket, which accepts a footswitch for talkback management, LFE muting, and more. RedNet R1 can be powered via Ethernet to reduce cabling complexity (using the PoE standard) or by the supplied DC power supply.
- Features
- Supports Mono to 7.1.4 Surround
- Comprehensive Monitor Controls
- Switch & Sum Channels, Fold-Down Presets
- Flexible Talkback Functionality
Specifications
- Displays
2 x LCD Screens
- Network Ports
1 x RJ45
- Inputs
1 x XLR 3-Pin Female Mic Input (Electronically Balanced)
- Outputs
1 x 1/4" TRS Headphone Output (Unbalanced)
- Footswitch Input
1 x 1/4" TRS
- Phantom Power
+48 VDC (Switchable)
- Gain Range
Internal Talkback: 0 to 55 dB Mic Input: 0 to 55 dB
- Maximum Input Level
Internal Talkback: +10 dBu (±0.5 dB) Mic Input: +10 dBu (±0.5 dB)
- Impedance
Internal Talkback: 3 Kilohms Mic Input: 3 Kilohms Headphone Output: 5 Ohms
- Headphone Impedance Range
32 to 600 Ohms
- Frequency Response
Mic Input: 20 Hz to 20 kHz (±2 dB) Headphone Output: 20 Hz to 20 kHz (±0.5 dB)
- THD + N
Mic Input: < -98 dB (0.0012%) at -1 dBFS Headphone Output: -100 dB (0.001%) at -1 dBFS
- EIN
Mic Input: < -128 dBu A-Weighted (Typical)
- Signal-to-Noise Ratio
Mic Input: -111 dB A-Weighted (Typical), Minimum Gain
- Common Mode Rejection Ratio
Mic Input: < -77 dB (50/60 Hz)
- Dynamic Range
Headphone Output: 108 dB A-Weighted (Typical), 20 Hz to 20 kHz
- Noise
Noise in Presence of Signal: > -97 dBu A-Weighted
- Reference Level
0 dBFS = +11 dBm
- Crosstalk
Mic Input to Headphone Output: < -122 dB; 20 Hz to 20 kHz (All Other Channels at 0 dBFS) Headphone Output to Mic Input: < -84 dB; 20 Hz to 20 kHz (All Other Channels at 0 dBFS) Headphones (Left to Right): < -85 dB; 20 Hz to 20 kHz (All Other Channels at 0 dBFS) Headphones (Right to Left): < -85 dB; 20 Hz to 20 kHz (All Other Channels at 0 dBFS)
- Bit Depth
24-Bit
- Sample Rates
44.1, 48, 88.2, and 96 kHz / -4, -0.1, +0.1, and +4.2%
- Clock Sources
Internal or External via Dante Network Master
- OS Compatibility
macOS 10.13 to 11 Windows 10
- Power Requirements
PoE or 12 VDC Power Supply (Included)
- PoE
Complies with IEEE 802.3af Class 0 Power-over-Ethernet Standard (PoE A or PoE B Compatible)
- DC Power Supply
12 VDC, 1.2 A External Power Supply
- DC Power Input
2.5mm Locking Barrel Input
- Power Consumption
PoE: 10.3 W DC: 9 W via Supplied DC PSU
- Operating Temperature
104°F / 40°C
- Dimensions
2.3 x 10.4 x 5.3" / 5.8 x 26.5 x 13.5 cm
- Weight
1.9 lb / 0.8 kg
- Package Weight
3.69 lb
- Box Dimensions (LxWxH)
16.2 x 7.5 x 4.4"