FLASHFORGE Creator 5 Pro 4-Toolhead Enclosed Multi-Color 3D Printer, 256 x 256 x 256mm, 65°C Heated Chamber

FLASHFORGE Creator 5 Pro 4-Toolhead Enclosed 3D Printer

The FLASHFORGE Creator 5 Pro is a high-speed, enclosed FDM 3D printer with four independently controlled toolheads. It supports up to four colors or compatible materials in a single model, enabling multi-color prototypes, multi-material functional parts, and soluble-support workflows with less color-change waste than shared-nozzle systems.

Built for advanced materials

Fully enclosed printer with active chamber heating up to 65°C

HEPA 13 and activated-carbon air filtration

320°C maximum hardened-steel nozzle temperature

120°C maximum heated-bed temperature

Compatible with PLA, PETG, TPU, ABS, ASA, HIPS, PA-CF, PET-CF, PAHT-CF, PPA-CF, PPS-CF, and other supported filaments

Four independent toolheads

Up to four colors or compatible materials in one print

Independent toolheads reduce cross-color contamination

Automatic multi-toolhead offset calibration

Dynamic flow calibration and automatic print compensation

Standard 0.4 mm removable nozzles; 0.25 mm, 0.6 mm, and 0.8 mm options available

Performance and workflow

Build volume: 256 x 256 x 256 mm

Maximum print speed: 300 mm/s

Maximum travel speed: 600 mm/s

Maximum acceleration: 30,000 mm/s2

Textured PEI flexible steel build plate

Built-in 1280 x 720 Full HD camera for remote monitoring

USB and dual-band Wi-Fi connectivity

Compatible slicing software: Orca-Flashforge and OrcaSlicer

Specifications / Features

Printer Type: Enclosed FDM / FFF 3D Printer Toolhead Quantity: 4 Independent Toolheads Maximum Colors / Materials Per Print: Up to 4 Build Volume: 256 x 256 x 256 mm Build Plate: Textured PEI Flexible Steel Build Plate Nozzle Diameter: 0.4 mm Standard Optional Nozzle Sizes: 0.25 mm, 0.6 mm, 0.8 mm Nozzle Material: Hardened Steel Maximum Nozzle Temperature: 320°C Maximum Bed Temperature: 120°C Active Chamber Heating: Up to 65°C Air Filtration: HEPA 13 Filter + Activated Carbon Maximum Print Speed: 300 mm/s Maximum Travel Speed: 600 mm/s Maximum Acceleration: 30,000 mm/s2 Maximum Flow Rate: 32 mm3/s Auto Bed Leveling: Yes Dynamic Flow Calibration: Yes Filament Run-Out Detection: Yes Power-Loss Recovery: Yes Camera: Built-in Full HD Camera, 1280 x 720 at 30 fps Display: 4-inch 800 x 480 Full-Color Touchscreen Connectivity: USB, 2.4 GHz / 5 GHz Wi-Fi Compatible Slicing Software: Orca-Flashforge, OrcaSlicer Structure: Fully Enclosed Frame Recommended Filaments: PLA, PETG, TPU, PLA-CF, PETG-CF, PVA, BVOH, ABS, ASA, HIPS, PA-CF, PET-CF, PAHT-CF, ASA-CF, ABS-GF, PPA-CF, PPS-CF Net Weight: 18 kg Input: 100120V / 200240V AC, 50/60Hz, 1200W

Important note

Filament is manually loaded into each toolhead. Material combinations must use compatible temperatures, adhesion behavior, drying conditions, and selected print profiles. Follow the filament manufacturer's safety and processing recommendations.