ENTTEC OCTO Mk2 LED Pixel Controller

Take your architectural, commercial, and entertainment projects to the next level using the OCTO Mk2 LED Pixel Controller from ENTTEC. This compact dual-output eDMX to LED pixel data converter is a reliable choice to directly connect to your pixels. A great choice for the ultra-fast deployment of LED strips and pixel dot systems with up to eight universes of Ethernet-DMX to pixel protocol conversion. You can have multiple OCTO Mk2 chained together to easily expand the network. TS35 DIN rail, surface mount options, and network chaining make the OCTO Mk2 a versatile LED pixel control device. It includes an ELM LED mapping software license for your convenience.

Firmware Updated for Increased Flexibility

UL certification to ensure the safety and reliability of the OCTO Mk2

The Overdrive mode allows users to configure the OCTO Mk2 to output more than four universes per port, which may result in a lower maximum FPS

The Standalone mode allows users to create and edit gradient FX effects with real-time previews seamlessly

You can configure the OCTO Mk2 to run in Standalone mode upon power-up, with no need for an external DMX source

Details

Controls up to eight universes of pixels (1024 RGBW / 1360 RGB / 4096 W)

4096 channels

Supports more than 20 pre-listed pixel output protocols

Test/Reset button allows installers to quickly check if the wiring is correct

Compatible with third-party software and applications

Professional Networking

Supports Art-Net, sACN, and KiNet inputs to give flexibility to your projects

ArtSync ensures that all pixel and DMX outputs are synchronized to avoid image tearing

The OCTO Mk2 allows either DHCP or Static IP configuration to suit your requirements

Web Configuration

The OCTO Mk2's intuitive web-based configuration gives you access to configure, update, and monitor the temperature using your preferred browser from anywhere on the network. Besides that, grouping functionality is available to reduce the control channel count while still controlling up to eight universes of LED pixels.

Power

Whether you want to control 5V pixel tape or 60V pixel dots, the OCTO Mk2's wide voltage input range will give you the flexibility to power it directly using the same source of your LED pixels.

Ideal for Tight Spaces

Multiple units can be chained together with a maximum cable length of 328' between devices to dramatically cut down the number of cable runs required. Up to 50 units can be linked per chain, though ENTTEC recommends eight devices per chain for optimum visual synchronization.

Flexible Mounting Options

The OCTO Mk2's compact case is capable of being surface mounted in various orientations or fitted to a TS35 DIN rail using its included DIN clip.