Empress Effects Buffer+ Analog I/O Interface Pedal with Switchable Boost
at B&H Photo Video
About this item
Improve the signal integrity and efficiency of your pedalboard with Buffer+ from Empress Effects, an all-analog I/O interface pedal that helps eliminate signal loss from long cable runs or unbuffered bypassing. Loaded with useful functions like an input pad, 30 dB clean boost, and 2-way noise filter, Buffer+ maintains perfect tone.
Input Pad
With a three-way switch, you can pad or boost your input by 3 dB. This feature is great for matching outputs of different guitars, reducing overly hot active pickup signals, or boosting the signal going to your FX for an improved signal-to-noise ratio.
Noise Filters
Similar to the technology of Dolby's noise filters, Buffer+ sports a selectable noise filter with two different modes (little or lots) to remove unwanted noise from your FX chain. If you have gain or modulation pedals that tend to add excessive noise and feedback that you find undesirable or difficult to control, these noise filters will help reign them in.
Tuner Output
The separate tuner output is not only useful for keeping your tuner out of your FX signal chain, it can also be used as a secondary output for numerous applications. Use this second jack for stereo output, DI recording, or as a key signal for a noise gate or side-chain compressor. The tuner output also has a dedicated mute function, separate from the pedal's buffer.
Input Loading
The main goal of a buffer is to prevent signal loss, but some high-frequency roll-off from a long cable run may sound pleasing. When this side-mounted knob is fully clockwise, the full frequency range of your guitar signal passes through.
Alternative Uses
The Buffer+ can also act as 1-in / 3-out splitter. The input signal is normally routed to the loop out and tuner out.
- Features
- All Analog Signal Path
- Eliminates Signal Loss on Pedalboards
- Ideal for Long Cable Runs and Bypass
- Adjustable Clean Boost up to 30 dB
Specifications
- Effect Type
Boost
- Instrument
Guitar
- Controls
1x Boost Knob2x Pad/Noise Filter Switch1x Boost Footswitch
- Presets
No Preset Saving
- Inputs/Outputs
1x 1/4" TS Instrument Input1x 1/4" TS Tuner Output1x 1/4" Amplifier Output1x 1/4" Effects Loop Send1x 1/4" Effects Loop Return
- USB
No
- Wireless
No
- Input Power
9 VDC at 86 mA
- AC/DC Power Adapter
Not Included
- Battery
No Battery Support
- Display
Single-LED Indicators Only
- Dimensions
4.5 x 2.5 x 2" / 11.4 x 6.4 x 5.1 cm (L x W x H, with Controls)
- Weight
0.5 lb / 0.2 kg
- Package Weight
0.675 lb
- Box Dimensions (LxWxH)
7.1 x 4 x 2.6"