DATAPATH 4K Display Wall Controller with Four SDI Outputs
at B&H Photo Video
About this item
Take your video wall projects to the next level with the 4K Display Wall Controller from DATAPATH. Delivering four SDI outputs and the ability to loop multiple units together, this controller enables you to create even large and complex video wall configurations. DATAPATH's intuitive wall designer software and fully featured API make projects quick to set up and easy to manage. The FX4 gives a choice of 3G-SDI, DisplayPort 1.2, and HDMI 1.4 inputs and offers up to DCI 4K 4096 x 2160p resolution at 60 fps.
Network Connectivity
The FX4-SDI has dual Ethernet ports to allow users to add the device to their networks. Only one FX4-SDI in the chain requires connection to the physical LAN as Ethernet loop-through is supported on the second port, meaning multiple devices can be connected.
Wall Designer
DATAPATH's multi-screen design tool, Wall Designer, allows users to add displays, visualize their content by adding inputs & adjusting display regions, and instantly program all FX4 units either via USB or via the network ports.
Displays Preloaded Image in the Event of Signal Loss
The FX4-SDI allows users to preload an image for immediate display whenever the media source or cables malfunction and no signal is being received.
- Features
- Flexible Video Wall Configuration
- 3G SDI, DisplayPort 1.2 & HDMI 1.4 Input
- Up to 4096 x 2160p Input at 60 fps
- 4 x SDI 1080p/60 Outputs
Specifications
- Video Input Connectors
3G-SDI (1080p/60 or equivalent up to 148.5 MP/s) DisplayPort 1.2 (2160p/60 or equivalent up to 616 MP/s) HDMI 1.4 (2160p/30 or equivalent up to 297 MP/s)
- Video Output Connectors
4 x 3G-SDI (1080p/60 or equivalent up to 165 MP/s) Loop-Through: DisplayPort 1.2 (locked to selected video input resolution)
- SMPTE Standards Supported
SMPTE ST 2048, up to 60 Hz SMPTE 274M, up to 60 Hz SMPTE 296M, up to 60 Hz
- Input
4096 x 2160p at 60, 8K x 8K maximum
- Genlock Input
Analog black-burst on dedicated BNC connector Any video input (SDI, HDMI, DisplayPort)
- Control Interfaces
2 x 100BaseT Ethernet ports with built-in managed switch USB 2.0 Type-B connector (full-speed operation)
- Firmware Updates
Via USB and Ethernet connection
- Power Requirements
100 to 240 VAC, 50/60 Hz, 35 W IEC switched and fused mains connector
- Operating Temperature
32 to 96°F / 0 to 35°C
- Storage Temperature
-4 to 158°F / -20 to 70°C
- Relative Humidity
5 to 90% non-condensing
- Dimensions
12.4 x 6.8 x 1.7" / 31.6 x 17.2 x 4.2 cm
- Weight
4.1 lb (1.86 kg)
- Package Weight
5.675 lb
- Box Dimensions (LxWxH)
16.45 x 10.3 x 3.45"