Benchmark DAC3-HGC Reference DAC and Stereo Preamp with HPA2 Headphone Amplifier (Silver)
at B&H Photo Video
About this item
The silver DAC3-HGC from Benchmark is a two-channel reference preamplifier with built-in headphone amplifier and digital to analog converter system. It is capable of converting Direct Stream Digital (DSD) signals as well as Pulse Code Modulation (PCM) files up to 24-bit / 192 kHz. Designed as an output device for computer-based media, the DAC3-HGC can be used with home media servers, digital audio workstations, desktop audio editing applications, and computer-based radio broadcast systems. The DAC3-HGC maintains the familiar DAC2 form factor and feature set, but delivers the higher performance available from the ES9028PRO D/A converter chip.
- Features
- ES9028PRO Converter Chip
- Quad 32-Bit Balanced D/A Conversion
- Hybrid Gain Control Technology
- Native PCM or DSD Conversion
Specifications
- Sampling Frequency
Fs = 44.1 to 96 kHz, 20 Hz to 20 kHz BW, 1 kHz test tone, 0 dBFS = +24 dBu (unless noted)
- Signal to Noise Ratio
A-Weighted, 0 dBFS = +27 dBu: 128 dB Unweighted, 0 dBFS = +27 dBu: 126 dB
- Dynamic Range
A-Weighted at Maximum Volume: 128 dB Unweighted at Maximum Volume: 126 dB
- Total Harmonic Distortion/Noise
1 kHz at 0 dBFS: -113 dBFS, -113 dB, 0.00022% 1 kHz at -1 dBFS: -114 dBFS, -113 dB, 0.00022% 1 kHz at -3 dBFS: -119 dBFS, -116 dB, 0.00016% 20 Hz to 20 kHz Sweep at -3 dBFS: -113 dBFS, -110 dB, 0.00032%
- Frequency Response
Fs= 192 kHz: +0 dB, -0.015 dB (20 Hz to 20 kHz) -0.015 dB at 10 Hz -0.005 dB at 20 kHz -0.031 dB at 40 kHz -0.15 dB at 80 kHzFs= 48 kHz: +0 dB, -0.015 dB (20 Hz to 20 kHz) -0.015 dB at 10 Hz -0.005 dB at 20 kHz
- Crosstalk
-116 dB at 20 kHz -130 dB at 1 kHz -137 dB at 20 Hz
- Max Amplitude
Jitter Induced Sidebands (10 kHz 0 dBFS test tone, 12.75 UI sinusoidal jitter at 1 kHz): < -144 dB Spurious Tones with 0 dBFS Test Signal: < -138 dB Idle Tones: < -147 dB AC Line Related Hum & Noise: < -133 dB
- Inter-Channel Differential Phase
Stereo pair - Any Sample Rate: ±0.25° at 20 kHz Between DAC3 Units Fs < 110 kHz - Any Sample Rate: ±0.25° at 20 kHz
- Maximum Lock Time
After Fs change: 6 ms
- Soft Mute
Ramp Up/Down Time: 9.6 ms
- Mute
On Receive Error: Yes On Lock Error: Yes On Idle Channel: No
- De-Emphasis
50/15 us De-Emphasis Enable: Automatic in Consumer Mode De-Emphasis Method: Digital IIR De-Emphasis Supported at: Fs = 32, 44.1, 48 kHz
- Latency
Digital Input to Analog Output (Function of Sample Rate): 1.36 ms at 44.1 kHz 1.27 ms at 48 kHz 0.90 ms at 88.2 kHz 0.82 ms at 96 kHz 0.51 ms at 176.4 kHz 0.47 ms at 192 kHz
- Inputs
2 x RCA stereo pairs
- Input Impedance
Coaxial Inputs: 75 Ohms
- Analog Input Clip Point
+18.5 dBu (6.5 Vrms)
- Input Sensitivity
+8.2 dBu (2 Vrms)
- Input Bandwidth
500 kHz, -0.6 dB at 200 kHz
- Input THD+N
Analog to Analog, 2 Vrms In, +24 dBu Out: -110 dB (0.00032%)
- Outputs
2 x 1/4" TRS, with switch on left-hand jack
- Output Impedance
<0.11 Ohms
- Output Clipping Level
+29 dBu
- Output Level
Factory-Set Home Theater Bypass Output Level (with 0 dBFS digital input): +8.2 dBu (2 Vrms) Output Level Range (with 0 dBFS digital input): Off to +11.7 dBu (3 Vrms) Output Level Variation with Sample Rate: < ±0.006 dB
- Balanced Output
2 x gold-pin Neutrik male XLR
- Bypass Level
Factory-Set (with 0 dBFS digital input): +24 dBu (attenuator = 0 dB)
- Volume Control
With 0 dBFS digital input: Off to +27.5 dBu (attenuator off) Off to +17.5 dBu (attenuator = 10 dB) Off to +7.5 dBu (attenuator = 20 dB)
- Output Level Variation
Output Level Variation with Sample Rate: < ±0.006 dB
- Channels
2
- Digital Inputs
Switchable between: 1 x USB 1.1 or USB 2.0 2 x TOSLINK optical 2 x coaxial
- Formats
supports PCM stereo, AES/EBU, S/PDIF digital formats
- Input Sample Frequency Range
Coaxial Inputs: 28 to 210 kHz Optical Inputs: 28 to 96 kHz USB Input: 44.1, 48, 88.2, 96, 176.4, 192 kHz (USB input)
- Word Length
Maximum: 24 bits
- Capacitors
DC Blocking: Yes (coaxial inputs)
- Transient/Over-Voltage Protection
Yes (coaxial inputs)
- Minimum Input Level
Coaxial: 250 mV p-p
- Jitter
Tolerance (With No Measurable Change in Performance): >12.75 UI sine, 100 Hz to 3 kHz >1.5 UI sine at 20 kHz >1.5 UI sine at 40 kHz >1.5 UI sine at 80 kHz >1.5 UI sine at 90 kHz >0.25 UI sine above 160 kHzJitter Attenuation Method: Benchmark UltraLock3 (all inputs)
- Type
HPA2
- Output Level Control
Stereo control on front panel
- Output Level Range
Off to +21.5 dBu (9.2 Vrms), with 0 dBFS digital input
- Output Power
1.25 W into 30 Ohms
- Maximum Output Current
250 mA
- Overload Protection
Current Limited: 300 mA, thermal (independent per channel)
- Bandwidth
500 kHz, -0.35 dB at 200 kHz
- THD + N
At 20 mW: -108 dB (0.0004%) into 300 Ohms -100 dB (0.0010%) into 30 Ohms
- Indicators
16 x LEDs on front panel
- Selection Indication
1 x Dim/Mute 1 x Polarity 7 x Input 1 x Bypass/Calibrated Output 2 x Word length 4 x Sample Rate
- System Requirement
USB Audio 1.1 Mode (no driver installation required): Windows XP, Vista, 7, 8, 10 Mac OS X, iPads with 30-pin to USB camera kitUSB Audio 2.0 Mode Windows XP, Vista, 7, 8, 10 (driver installation required for all Windows versions) Mac OS X 10.6 and later (no driver installation required for all OS X versions)
- Remote
Compatible with Benchmark IR remote control (included)
- Operating Voltage
Nominal Operating Range: 100-240 VAC, 50/60 Hz Min/Max Operating Range: 90-260 VAC, 47/63 Hz
- Power
<0.5 W, standby 12 W, typical program 15 W, maximum
- Fuses
5 x 20 mm (2 required) 0.5 A 250 V, Slo-Blo type
- Compliance
FCC, RoHS
- Rack Size
1/2-rack wide, 1 RU high
- Dimensions
8.500 x 9.500 x 1.725" / 215.900 x 241.300 x 43.815 mm Overall depth including connectors: 9.33" / 236.982 mm
- Weight
3 lb (1.36 kg)
- Package Weight
5.3 lb
- Box Dimensions (LxWxH)
14.5 x 11.1 x 3.6"