Behringer RX1602 Professional Multi-Purpose 16-Input Ultralow-Noise Line Mixer
at B&H Photo Video
About this item
Achieve premium-quality sound with the Behringer RX1602, a flexible multipurpose line mixer that's great for sub-mixing multiple keyboards, sound modules, and samplers as well as any line-level source. The mixer provides remarkable clarity thanks to the Ultralow Noise (ULN) design for the highest headroom possible.
Benefits
Extremely flexible multipurpose sub-mixer, multi-track monitoring mixer and level translator
16 balanced high-headroom line inputs for individual stereo or mono use of each section
Ultralow noise ULN design, highest possible headroom, ultra-transparent audio
Dedicated balance and level controls plus +4/-10 level selection per channel
Monitor/FX Send control per section with global master send control for flexible monitoring, recording or effects applications
Illuminated double-function "mute" button per section with additional "clip" indication provides comfortable input source/level information
Monitor/FX signal assignable to phones output for added flexibility
Highly accurate 2 x 7-segment LED level meters and individual level control for left and right main mix signal
1/4" TRS main mix outputs plus easily accessible headphones output on the front panel with dedicated level control
High-quality detented rotary controls for long-term reliability
Internal switch-mode power supply (100 to 240V) for noise-free audio and low power consumption
Channel with Care
The RX1602 comes equipped with all the necessary features to create the right mix for your sound, including 16 high-headroom inputs (8 stereo or 16 mono), which can be used for individual line-level instruments or component outputs. Thanks to RX1602’s Ultralow-Noise (ULN), high-headroom design, you can run up to 16 inputs, even at very high signal levels, without the slightest hint of clipping distortion, which means your precious audio content will exhibit the ultimate in signal integrity and absolute transparency.
Each dual-input channel features individual Balance and Level controls, plus an illuminated, double-function Mute button with a built-in Clip LED that makes it easy to set optimal signal levels. You also get highly accurate, dual 7-segment LED level meters and individual Left and Right Main Mix level controls. For added flexibility, the Monitor/FX signal is also assignable to the headphones. And if you need to add vocals to the mix, just connect a high-quality microphone preamplifier (such as our MIC100 or MIC2200, not included.)
Panel Discussion
All of the RX1602 mixer's 1/4" TRS inputs can be found on the rear panel, along with the L/R main outputs, which are ideal for sending the mix to your recording device or PA system. Use the monitor out to send the monitor bus signal to your live-performance floor monitors, or to the headphone amp in the recording studio. Alternatively, the monitor out is the best way to add FX to your mix.
- Features
- Sub-Mixer and Multi-Track Monitor Mixer
- 16 Balanced Line Inputs (Stereo & Mono)
- Ultralow-Noise Design (ULN)
- Dedicated Balanced & Level Control
Specifications
- Number of Analog Input Channels
16 (8 Mono / 8 Stereo)
- Number of Mic Preamps
No
- Analog Output Channels
1x Stereo Master Output
- EQ
No
- Built-In Effects
No
- Wireless
No
- Rack Mountable
Yes
- Mix Routing
1x Stereo Main Mix1x Mono Aux Send per Input Channel, Mono Input Channel, Stereo Input Channel
- Faders & Level Adjustment
8x Channel Knob8x FX Knob2x Master Knob
- Meters
7-Segment LED
- Gain/Trim Range
1/4" Line Input:Up to +15 dB
- Dynamic Processing
No
- Solo/Mute
No
- Frequency Response
10 Hz to 200 kHz ±3 dB 20 Hz to 20 kHz ±0.2 dB
- Max Input Level
+22 dBu
- I/O Impedance
1/4" TRS Line Input:10 Kilohms (Balanced/Unbalanced) 1/4" TRS Main Output:240 Ohms (Balanced) 120 Ohms (Unbalanced) 1/4" TRS Headphone Output:100 Ohms
- SNR
< -97 dB
- THD+N
0.003% at Unity Gain (+4 dBu)
- Analog Inputs
16x 1/4" TRS Balanced/Unbalanced Line Input (8 Stereo Pairs)
- Analog Outputs
2x 1/4" TRS Balanced/Unbalanced Stereo Main Output1x 1/4" TRS Balanced/Unbalanced Aux Send
- Phantom Power
No
- Digital I/O
No
- AC Input Power
100 to 240 VAC, 50 / 60 Hz
- Rackmount Size
1 U
- Dimensions
19 x 1.7 x 5.9" / 48.3 x 4.3 x 15 cm
- Weight
4 lb / 1.8 kg
- Package Weight
5 lb
- Box Dimensions (LxWxH)
20.8 x 9.6 x 4.25"