Yamaha ADECIA Ceiling Microphone and Line Array Speaker Kit (Black)
من B&H Photo Video
حول هذا المنتج
The Yamaha ADECIA Ceiling Microphone and Line Array Speaker Kit from B&H includes a black RM-CG beamforming ceiling microphone, an RM-CR remote conference processor, a pair of black VXL1B-16P slim, line-array speakers, and an SWR-2311P-10G Dante-optimized network switch with PoE. Featuring world-renowned Yamaha technology, the ADECIA professional communication system delivers consistent, crystal-clear audio capture and accurate sound reproduction for highly intelligible speech and natural-sounding conversations in conference calls, video conferencing, remote collaborations, and distance learning. It is well suited for small- to medium-sized training rooms, conference rooms, classrooms, multipurpose rooms, and boardrooms.
Yamaha RM-CG Ceiling Array Microphone (Black)
Yamaha RM-CR Remote Conference Processor with Dante
Yamaha VXL1B-16P Line-Array Wallmount Speaker for ADECIA System (Black, Not Sold Separately)
Complete Network Overview
Using the dedicated Yamaha LAN Monitor software allows quick troubleshooting; you can check the PoE power supply status, turn the PoE power supply on or off, and use the snapshot function to inform you whether a fault has occurred by detecting any difference in the state of the network since it was set up. The web GUI provides a full range of monitoring functionalities, including dead/alive monitoring settings for PoE devices, allowing you to restart the PoE device if a fault occurs, or informing you via email of a fault.
Snapshot Function
You can take a snapshot of the network status when set up as required. The software can then automatically keep track of settings and alert you to any changes. For example, you could take a snapshot of the network, and be alerted if a cable is disconnected, if a device is turned off, or if a wrong connection is made prior to the performance.
Enhanced Device ID with Icons, Labels, and Comments
Identifying devices connected to a switch by only their IP or MAC address can be difficult and prone to errors. Connected Dante devices are identified by a Dante icon as well as a device ID previously set up via the Dante Controller software. You can also enter additional info, such as the location of the device, in the Label and Comment fields.
Intelligent Security Management
Augmenting the VLAN functionality included in the SWR2311P-10G is a built-in RADIUS server function. By setting up one switch as a RADIUS server and linking other switches to it, unauthorized network access can be effectively blocked for enhanced security, even in complex large-scale installations. Device authentication can be set up quickly and easily via a web-based GUI.
Network Visualization
The SWR2311P-10G supports the LAN Map Light visualization function by WebGUI. Switch settings can be made on graphical screens, not by command entry. By utilizing WebGUI, it has extensive monitoring functions, such as PoE device monitoring, restarting PoE devices in case of trouble, setting email error notifications, and more. With Yamaha's proprietary L2MS communication protocol, you can check the IP addresses of Yamaha network devices and the network devices connected to them. It can be used widely from system design to maintenance.
microSD Card Slot
A microSD card can be used for backing up accumulated data in addition to activating and updating firmware.
- Features
- For Conferencing, Meetings, Education
- White RM-CG Ceiling Array Microphone
- RM-CR Conference Processor with Dante
- Beamforming Mics Track Person Talking
المواصفات
- Speaker Type
Full-Range, Powered Speaker, Bass Reflex
- Frequency Response
80 Hz to 20 kHz
- Nominal Coverage Angle
H: 170° V: 25° (+12.5 to -12.5°)
- Effective Coverage
H: 180° V: 30° (+15 to -15°)
- Components
16 x 1.5" / 3.75 cm Cone
- Maximum Output Level
102 dB SPL, when Using PoE+(IEEE 802.3at)
- Power Rating
Dynamic: 15 W, PoE+ (IEEE 802.3 at), 6 W, PoE (IEEE 802.3 af) Continuous: 15 W (PoE+, IEEE 802.3 at), 6 W, PoE (IEEE 802.3 af)
- I/O Connector
1 x RJ45 (Dante)
- Protection Circuits
Speaker Processing: Clip Limiting, Integral Power Protection Amplifier Protection: Overcurrent Protection, Over-Temperature Protection, Undervoltage Lock Out, DC Detection, Clock Detection Power Supply Protection: Overload Protection, Overvoltage Protection, Undervoltage Lock Out
- Cooling
Natural Convection
- Power Requirements
PoE+ (IEEE 802.3at), PoE (IEEE 802.3af)
- Power Consumption
Idle: 3 W with 1/8 (Pink Noise), 6 W with PoE+(IEEE 802.3at), 4.3 W with PoE(IEEE 802.3af)
- Finish and Grille Color
Black Painting (Approximate Value: Munsell N3.0)
- Magnetic Shielding
No
- Dust and Water Resistant
No
- Dimensions (W x H x D)
2.1 x 44.1 x 4.1" / 54 x 1120 x 104 mm
- Weight
11 lb / 5 kg
- Package Weight
15.82 lb
- Box Dimensions (LxWxH)
48.5 x 9 x 6.25"