Sony UWP-D26 Camera-Mount Wireless Combo Microphone Kit with Digital MI Shoe Adapter (UC14: 470 to 542 MHz)

This B&H Kit includes the Sony UWP-D26 camera-mount wireless combo microphone system and the SMAD-P5 digital MI Shoe adapter which provides a direct, clean digital audio connection to select cameras equipped with a digital Multi Interface Shoe. If your camera is equipped with an analog MI Shoe, the adapter can be switched to provide an analog audio connection.

Professional Features to Speed Up Your Workflow

Press and hold the NFC/Sync button, and the receiver scans for the cleanest RF channel. Simply hold the transmitter next to the receiver; it automatically syncs up and you’re good to go!

Reliable Reception with True Diversity

To achieve stable audio, the UWP-D receiver employs true-diversity technology with two antennas and two independent receiver sections within the unit. Both RF signals are compared and the stronger signal is automatically selected for output—reducing dropouts to a minimum.

High-Quality Sound with Digital Audio Processing

Unlike traditional analog wireless systems, The UWP-D supplements its proven analog UHF transmission technology with a proprietary digital audio processing. Transient sounds and consonants are reproduced with greater accuracy, resulting in clear, natural sound that’s intelligible and nuanced.

A Compact Build, Ready for the Camera

The UWP-D26 features a robust, all-metal construction well suited for tough operating conditions.

Direct Digital Audio via SMAD-P5 MI Shoe Adapter

The SMAD-P5 digital MI Shoe adapter allows you to integrate the receiver with XDCAM camcorders and select Sony cameras equipped with a Multi Interface Shoe.

This setup provides a direct digital connection, skipping the receiver’s D/A and camera’s A/D converters for superior audio quality and low noise.

Audio information such as RF level meter, audio-mute status, and low-battery alert for the transmitters is displayed on the camera's viewfinder.

This cable-free configuration allows for fast setup in the field.

Compatible models include the a7R IV mirrorless camera, the PXW-Z280 and PXW-Z190 XDCAM camcorders, and more.

Multiple Powering Options

Two AA batteries (alkaline or NiMH rechargeable type) power the bodypack transmitter for up to 8 hours, the plug-on transmitter for up to 6 hours, and the receiver for up to 6 hours.

Headphone Monitoring for Location Sound

If your camera doesn’t have a headphone jack, Phone mode lets you monitor your sound via the receiver’s headphone output while recording.

Other Features

The RF output level on the bodypack transmitter has two settings: the 5mW option allows you to conserve battery life, while the 30mW setting gives you more power to overcome interference, great in busy RF environments.

On the plug-on, the RF output level can be switched between 5 and 40mW.

Switchable Mic/Line input level so you can set the correct gain level for your sound source.

Low-cut filter reduces noise caused by wind or machinery—Off / Low (100 Hz) / Mid (150 Hz) / High (200 Hz).

The receiver provides a variable output level control of ±12 dB, useful when working with cameras without manual input level control.

Simple menus make navigation easy. Advanced menus for in-depth control are also available.

The variable mute buttons on the transmitters can be programmed for latched or momentary muting. It can also be used as a momentary talk button.

You can operate up to 16 mics in one location.

Compatibility with Other Sony Wireless Systems

The UWP-D transmitter can be used with a UWP Series or WL-800 Series receiver. A UWP Series or WL-800 Series transmitter can be used with a UWP-D receiver.

Sony SMAD-P5 Digital MI Shoe Adapter for UWP-D Series