حول هذا المنتج
Color : whiteDescription : WIFI Kit series is the new development of the cost-effective networking program, the main chip using Lexin ESP32, Tensilica LX6 dual-core processor, 240MHz, computing power up to 600DMIPS, chip built-in 520 KB SRAM, 802.11 b / g / N HT40 Wi-Fi transceiver, baseband, protocol stack and LWIP, integrated dual-mode Bluetooth (traditional Bluetooth and BLE low power Bluetooth). Onboard 8MByte(64M-bit) Flash, Wi-Fi antenna, 0.96 -inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip, the perfect support for Arduino development environmentSpecification : Operating voltage : 3.3V to 7VOperating temperature range : -40 C to + 90 CData rate : 150 Mbps 11n HT40, 72 Mbps 11n HT20, 54 Mbps 11g, 11 Mbps 11bTransmit power : 19.5 dBm 11b, 16.5 dBm 11g, 15.5 dBm 11nFlash Size : 8MByte(64M-bit)Module Size : 50* 25.4 * 10.3 mmLithium battery interface: 2Pin- 1.25 mm interfaceReceiver sensitivity up to - 98 dBmUDP continues to throughput by 135 MbpsSupports Sniffer, Station, softAP and Wi-Fi Direct modesPackage Including1 * ESP32 Development Board with OLED2 * Pin headers
- Features
- *****
- **********
- ***** *****
- *****Best Quality Guranteed.*****
- *****[Full documentation]: https://drive.google.com/file/d/1_P9HP9dKquaM_gGJa4mBdF9D2Kwx_v6s/view?usp=sharing; [Note]: This ESP32 development board comes unassembled, soldering of headers is required!! It can lithium battery powered, the lithium battery is not included, battery may be purchased here: https://www./dp/B07CXNQ3ZR*****
- *****Add battery power detection circuit. Use ADC2_4 (GPIO 13) to read battery voltage. Please refer to this example: https://github.com/HelTecAutomation/Heltec_ESP32/blob/master/examples/ESP32/ADC_Read_Voltage/Battery_power/Battery_power.ino*****
- *****[This is an upgraded version WiFi Kit 32! ] What's the Upgrade of New WiFi Kit 32? 1. 4MB (32M-bits) FLASH upgrade to 8MB (64M-bits) FLASH; 2. Better 2.4GHz antenna design and impendence matching; 3. Basic low power design (800uA in deep sleep); 4. Add battery power detection circuit. Use ADC2_4 (GPIO 13) to read battery voltage. Please refer to
المواصفات
- First Listed on Newegg
August 15, 2025