Alphacool Eiszapfen Temperature Sensor Flat Fitting G1/4 - Chrome (17597)

The Alphacool Eiszapfen Temperature Sensor Flat Fitting G1/4 - Chrome is a simple, flat water temperature sensor with a G1/4 thread for G1/4 female connectors. It carries an NTC 10 kOhm thermistor on a 40 cm cable with a 2-Pin connector, and one sensor comes per pack. Properties Thread: G1/4, 5 mm thread length Thermistor: NTC 10 kOhm, -40 to 125 °C Cable: 40 cm, 2-Pin connector Size (H x D): 17 mm x 18 mm Material and color: Brass, chrome Pieces in the pack: 1

Integration made easy The sensor is very compact, and due to its G1/4 external thread it can be easily integrated into any water loop or circuit. It is simply screwed into the corresponding G1/4 connection, at any position in the loop. The screw-in depth is small, so Alphacool calls it compatible with all Alphacool products that have a free G1/4 connection. Sensor A classic NTC 10 kOhm thermistor is used as the sensor, and the readable temperature range is between -40 and 125 °C. The cable is 40 cm long and leads into a typical 2-pin connector. What it needs The sensor only measures, so the connector has to go somewhere that reads it. Many mainboards now offer direct connection options for such sensors: please check the manual of your mainboard. Of course there are also several external controllers that offer a connector for it, such as a fan controller with a sensor input. Design Alphacool kept the design very simple, so that the sensor can be installed almost invisible in the system. Compatibility G1/4 female connectors. Technical data H x D: 17 mm x 18 mm Material: brass Color: chrome Cable length: 40 cm Connection: 2-Pin Thermistor: NTC 10 kOhm Thread: G1/4 IT Thread length: 5 mm Total screw-in depth: 13 mm

In the box Alphacool Eiszapfen temperature sensor flat G1/4 - chrome