IZI1

Alphacool Core Double Sided Adhesive Thermal Pad - 100x100x0.25mm (13523)

لا توجد تقييمات
Newegg
USD 17.00

من Newegg

حول هذا المنتج

The Alphacool Core Double Sided Adhesive Thermal Pad - 100x100x0.25mm is a thermal pad that sticks on both sides, 100 x 100 mm in area and 0.25 mm thick. Its thermal conductivity is 1 W/mK ±10%. One white pad is in the pack, and it can be cut to the size you need. Properties Size (L x W x H): 100 x 100 x 0.25 mm Thermal conductivity: 1 W/mK ±10% Adhesive: Both sides Carrier: Fiberglass mesh Color: White Pieces in the pack: 1

What it is for Alphacool's double-sided adhesive Core pad can be used to cool electronic components of all kinds, anywhere where it is important to dissipate waste heat effectively. Alphacool says this significantly improves the performance and durability of those components. The material itself is sticky, and assembly is simplified by that stickiness, which Alphacool calls tackiness. Flexible and powerful Alphacool calls the thermal conductive pad reliable and powerful due to its material composition. With its low thickness it offers a wide range of possible applications, and it can be flexibly cut or tailored to suit and meet individual needs. The adhesive nature enables effortless assembly and mounting of electrical components such as DDR modules, motherboard components or power supplies. Technical specifications The structure of the pad is a fiberglass fabric, which Alphacool's table lists as the reinforcement carrier. Its continuous operating temperature runs from -30 to +120 °C, and in short-term operation of 30 seconds it takes 180 °C. Alphacool gives the holding force as more than 3000 minutes and the 180° peel adhesion on aluminum as more than 16 N per 25 mm of width. The density is 1.2 g/cc, or 1.2 g/cm3 as an Alphacool table writes it. Technical data Dimensions (L x W x H): 100 x 100 x 0.25 mm Thermal Conductivity (ASTM D5470): 1 W/mK ±10% Thickness (ASTM D374): 0.25 mm Reinforcement Carrier: Fiberglass mesh Continuous Working Temperature: -30~+120 °C Short time use temperature (30sec): 180 °C Density (ASTM D792): 1.2 g/cm3 Holding Power 1000g@25° Cusing 1 in2 (PSTC-7): over 3000 min 180° Peeling Strength (aluminum) (PSTC-101): over 16 N / 25mm Dielectric Breakdown Voltage (AC) (ASTM D149): 3 KV ±10% Thermal Impedance @10psi (ASTM D5470): 1.26 C-in2 / W Thermal Impedance @30psi (ASTM D5470): 1.06 C-in2 / W Thermal Impedance @50psi (ASTM D5470): 1.05 C-in2 / W Color: white

In the box 1x Alphacool Core double sided adhesive thermal pad 100x100x0.25mm

  • Features
    • Alphacool's double-sided adhesive core thermal pad can be used to cool electronic components of all kinds where it is important to effectively dissipate waste heat. This significantly improves the performance and durability of the components. The
    • safety data sheet
    • Safety data sheet(1)
    • Safety data sheet(2)
    • Overall dimensions: 100x100x0.25mm

المواصفات

Brand

Alphacool

Model

1023633

Part Number

1023633

Color

White

Features

Alphacool's double-sided adhesive core thermal pad can be used to cool electronic components of all kinds where it is important to effectively dissipate waste heat.

Package Contents

Alphacool Core Double Sided Adhesive Thermal Pad - 100x100x0.25mm

First Listed on Newegg

August 01, 2024

صور المنتجات هي لأغراض توضيحية فقط وهي صور نموذجية. قد تختلف الألوان أو النقوش أو المواصفات أو الأبعاد أو المقاسات أو الوظائف أو أي خصائص أخرى للمنتج الفعلي عن الواقع بسبب خصائص العرض، لذا يرجى الرجوع إلى تفاصيل المنتج المذكورة في الوصف.

قد يعجبك أيضًا