22 ft. x 42 ft. Rectangular Polypropylene Inground Pool Safety Cover for 20 ft. x 40 ft. Pools with Installation Tools

Protect an inground swimming pool through winter with this 22 ft. x 42 ft. rectangular safety cover, sized to fit 20 ft. x 40 ft. pools with 2 ft. of overlap for a tight, stretch-free fit. The high-strength polypropylene mesh is UV1000 rated and stays flexible from -22°F to 140°F, so it holds up to sun, wind and snow while double-band reinforcement and triple edge stitching add strength. Encrypted anchor points resist 30 mph winds and 200 lb. of snow pressure, and the cover meets ASTM F1346 with a static load capacity of 400 lb., helping keep children and pets away from the water. Homes, rentals and hotels can leave the pool unattended for the season; rainwater drains through the 0.3 mm mesh while leaves and branches 5 mm and larger are trapped, and 90% shading limits algae growth. Installation uses a simple measure, drill and tension sequence, and the included brass anchor bolts, stainless steel springs and tools let one person handle the job on concrete or stone decks. When spring arrives, remove the cover, rinse it with a garden hose and mild soap, let it dry fully, and store it flat in a dry, shaded spot. Check the anchors, springs and straps each season and replace worn hardware to keep the fit tight.